Een slimmere manier om te groeien. Rechtstreekse groothandel vanuit de fabriek. Meer dan 15 jaar groeiende expertise

Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.

Hydroponie en irrigatieGroothandelsaanvraag

Netafim 16mm Insert Barb Tee - 100 Pack

Model / SKU: 32500-011330

Laying out drip on a bench or a row bed means splitting lines, and the tee is the fitting that does it.

Size
16 mm
Fitting Type
Barb tee, barb x barb x barb
Dripline Inside Diameter
14.2 mm
Dripline Wall Thickness
0.9 to 1.2 mm
ReferentieprijsEUR 67.46

Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.

Geen betaling vereist. Een gesprek over uw behoeften.

Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK

Nog wat meer informatie over dit product.

Laying out drip on a bench or a row bed means splitting lines, and the tee is the fitting that does it.

Product details

  • Netafim 16mm Insert Barb Tee
  • This one has three barbed ports in a T shape, all sized for 16 mm dripline.
  • Water coming in one side carries straight through and also turns out the branch.
  • That lets one feed line serve two beds, or a lateral start partway along a header.
  • Netafim lists this tee for 16 mm dripline with an inside diameter of 14.2 mm.
  • Its catalog fits it to heavy wall tubing with walls from 0.9 to 1.2 mm.
  • Each barb grips the inside of the tube, so no clamps or glue are needed.
  • The body is a UV and chemical resistant polymer that holds up to sun and fertilizer in the water.
  • It is a single molded piece, so there are no joints inside the fitting to leak.
  • Netafim's catalog number for this 100 bag is 32500-011330.
  • One bag covers a large layout with tees to spare.
  • Keeping spares on hand also makes it simple to add a bed later.
  • Branching 16mm Dripline Without Leaks
  • Plan the layout first so each tee lands where a branch is needed.
  • Turn the water off and cut the run line square at the tee position.
  • Push the two cut ends onto the straight-through ports of the tee.
  • Then push the branch line onto the side port.
  • Seat each tube fully over its barb so the joint does not pull off under pressure.
  • A slight twist while pushing helps stiff tubing slide on.
  • Warm cold tubing in the sun for a few minutes to soften it.
  • Add up the emitter flow on both sides of the tee to check the feed line can carry it.
  • Very long branches lose pressure toward the end, so keep runs within the dripline maker's length tables.
  • Turn the zone on and check every port for drips at full pressure.
  • Flush both legs with their ends open before closing them off.
  • Mark tee positions on the layout plan so they are easy to find for future repairs.
  • Three Barbed Ports: Splits one 16 mm line into two runs.
  • Push-On Fit: No clamps, glue or tools.
  • Heavy Wall Fit: For 14.2 mm ID dripline, 0.9 to 1.2 mm wall.

Specificaties

Fitting Type
Barb tee, barb x barb x barb
Size
16 mm
Dripline Inside Diameter
14.2 mm
Dripline Wall Thickness
0.9 to 1.2 mm
Material
UV and chemical resistant polymer
Pack Quantity
100
Three Barbed Ports
Splits one 16 mm line into two runs.

Laten we ervoor zorgen dat het lukt voor jouw project.

Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.

Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.

Laten we samen groeien.

Vragen en discussie

0

Heb je een vraag of iets nuttigs te delen? Start het gesprek.

BLIJF ONTDEKKEN

Meer mogelijkheden voor uw ruimte

Bekijk alle producten
HET BEGIN VAN IETS GOEDS

Laten we uw project tot leven brengen.

Vertel ons wat u precies nodig heeft. Wij gebruiken uw gegevens om een ​​passende reactie op uw groothandelsaanbod op te stellen.

Uw productlijst

Geen betaling. Geen verplichtingen. Gewoon een behulpzaam gesprek.