Een slimmere manier om te groeien. Rechtstreekse groothandel vanuit de fabriek. Meer dan 15 jaar groeiende expertise

Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.

Growlink SI Pulse Module

Model / SKU: BMT-F-SI4 BACnet MS/TP

4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters

Inputs
4 × S0 pulse, DIN EN 62053-31 Class A
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)
Configuration
2 front rotary switches (address + bit rate)
ReferentieprijsEUR 221.97

Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.

Geen betaling vereist. Een gesprek over uw behoeften.

Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK

Nog wat meer informatie over dit product.

4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters

Product details

  • The BMT-F-SI4 carries four S0 inputs that meet DIN EN 62053-31 Class A.
  • BACnet MS/TP reports the rolling count back to the Growlink controller.
  • The software converts pulses to gallons per minute, then trims pump runtime to land the exact injection volume each dose calls for.
  • BACnet MS/TP S0 Input with Retentive Counters and 500 Hz Capture
  • Pulse capture runs at 50 Hz through the Accumulator object and 500 Hz through the PulseConverter object.
  • A high-pulse flow meter on a fast-cycling pump stays accurate.
  • Retentive memory holds the last counter reading through a power blip.
  • That matters when a recipe spans a UPS swap or breaker trip.
  • Address and bit rate set with two rotary switches on the front.
  • A new module drops onto an existing trunk without bringing the BACnet line up on a laptop.
  • 4 × S0 pulse inputs (DIN EN 62053-31 Class A): Plug any S0-output flow or energy meter into the module.
  • BACnet MS/TP over a single trunk: Reports counter values back to the Growlink controller and any other BACnet client without protocol gateways.
  • 50 Hz Accumulator / 500 Hz PulseConverter: Two BACnet objects cover slow utility meters and fast injection-pump feedback on the same module.
  • Retentive counter memory: Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.
  • 2 front-panel rotary switches: Set BACnet address and bit rate without a laptop or DIP-switch acrobatics.
  • 24 V AC/DC supply with spring-clamp terminals: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
  • TH35 DIN rail mount: IEC 60715 rail snap-in keeps panels tidy alongside BMT-F-TO4, BMT-F-AOP4, or BMT-F-RTR.
  • Technical Specifications

Specificaties

Inputs
4 × S0 pulse, DIN EN 62053-31 Class A
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)
Configuration
2 front rotary switches (address + bit rate)
Retentive counter memory
Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.

Laten we ervoor zorgen dat het lukt voor jouw project.

Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.

Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.

Laten we samen groeien.

Vragen en discussie

0

Heb je een vraag of iets nuttigs te delen? Start het gesprek.

BLIJF ONTDEKKEN

Meer mogelijkheden voor uw ruimte

Bekijk alle producten
HET BEGIN VAN IETS GOEDS

Laten we uw project tot leven brengen.

Vertel ons wat u precies nodig heeft. Wij gebruiken uw gegevens om een ​​passende reactie op uw groothandelsaanbod op te stellen.

Uw productlijst

Geen betaling. Geen verplichtingen. Gewoon een behulpzaam gesprek.