Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.
Regelaars en metersGroothandelsaanvraag
Growlink Batch TankLINK EC Sensor
Model / SKU: GL-LINK-ECSENSOR
Reading Conductivity with the Growlink Batch TankLINK EC Sensor
- EC Range
- 0–7,000 µS
- Temperature Compensation
- Built-in PT1000 element in cable
- Cable Length
- 10 ft (3 m); 30 ft available separately
- Calibration
- Single-point @ 1413 µS via LCD wizard
ReferentieprijsEUR 122.30
Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.
Geen betaling vereist. Een gesprek over uw behoeften.
Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK
Nog wat meer informatie over dit product.
Reading Conductivity with the Growlink Batch TankLINK EC Sensor
Product details
- The Growlink Batch TankLINK EC Sensor measures nutrient solution conductivity inside a batch tank in real time.
- The probe reads across a 0–7,000 µS range.
- Accuracy is ±20 µS below 2,000 µS and ±50 µS above that.
- Resolution is 2 µS — roughly 0.02 mS/cm in PPM-meter terms.
- A 10-foot cable runs from the probe to the Batch TankLINK controller's labeled screw terminal block.
- The cable also carries a PT1000 element that gives the controller automatic temperature compensation on every reading.
- Calibration is a single-point process at 1413 µS.
- Drop the probe into calibration solution alongside the temperature probe to lock in the cal pass.
- Wiring the TankLINK EC Probe into a Recirculation Loop
- Most batch-tank installs run a separate probe per recirculation loop.
- The 10-foot cable covers tanks within reach of the controller.
- The 30-foot option (available separately) handles longer runs where the controller mounts wall-side and the tank sits across the room.
- Pair the data with the TankLINK's automated dosing and refill triggers and the nutrient solution EC sensor holds the line to setpoint between batches.
- PT1000-compensated readings also mean morning EC checks match afternoon checks even when the room runs 8°F warmer under lights.
- Plug-and-play wiring keeps a single-probe swap during teardown to a few minutes.
- No driver shuffling — just the batch tank conductivity probe back into the terminal block and a fresh 1413 µS recalibrate.
- Most rooms swap the probe at the start of each season or when calibration drift crosses ±50 µS at the cal point.
- 0–7,000 µS Range: Covers the full PPM band growers feed across veg, transition, and bloom in one probe.
- Tiered Accuracy: ±20 µS below 2,000 µS and ±50 µS above — tight enough to catch real EC drift between feeds.
- Built-In PT1000 Compensation: The cable carries a temperature element so readings stay honest across an 8°F lights-on swing.
- 10 ft Cable Standard: Reaches most controller-to-tank layouts; a 30 ft version is available separately for longer runs.
- Single-Point Calibration: One 1413 µS solution and the LCD wizard handle the full cal — no two-point dance required.
- Technical Specifications
Specificaties
- EC Range
- 0–7,000 µS
- Temperature Compensation
- Built-in PT1000 element in cable
- Cable Length
- 10 ft (3 m); 30 ft available separately
- Calibration
- Single-point @ 1413 µS via LCD wizard
- Connection
- Screw terminal block on Batch TankLINK transmitter
- Compatible Controller
- Growlink Batch TankLINK
- Single-Point Calibration
- One 1413 µS solution and the LCD wizard handle the full cal — no two-point dance required.
Laten we ervoor zorgen dat het lukt voor jouw project.
Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.
Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.
BLIJF ONTDEKKEN
Bekijk alle productenMeer mogelijkheden voor uw ruimte
Regelaars en meters
Yield Lab 8 Outlet 120v/240v Grow Light Relay Controller
BronvermeldingEUR 81.49
Vragen en discussie
Heb je een vraag of iets nuttigs te delen? Start het gesprek.