Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.
Growlink Batch TankLINK
Model / SKU: GL-LINK-BATCH
Growlink batch tankLINK Controller for Real-Time Tank and Nutrient Management
- Input Power
- 24VDC (via Growlink HUB or compatible PSU)
- Power Consumption
- 5W
- Sensor Inputs
- pH, EC, Temperature, Tank Level
- Dimensions
- 7.75" × 7.75" × 3.75" (197 × 197 × 96 mm)
Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.
Geen betaling vereist. Een gesprek over uw behoeften.
Nog wat meer informatie over dit product.
Growlink batch tankLINK Controller for Real-Time Tank and Nutrient Management
Product details
- The Growlink batch tankLINK Controller handles pH, EC, temperature, and tank-level monitoring through a single 24VDC unit pulling roughly 5W at full duty.
- High-accuracy probes feed live readings back to Growlink OS, where recipes drive automated fill cycles and trigger deviation alerts before a batch drifts off-target.
- Operating range covers 50–122°F (10–50°C) and 0–75% RH non-condensing, which keeps it stable in greenhouse ranges and indoor flower rooms alike.
- Recirculating and Batch-Fill Workflows in an Automated Nutrient Dosing System
- Two cable lengths cover most fertigation layouts.
- The 10-foot kit (GL-LINK-BATCH) suits compact mixing stations sitting beside the rack, while the 30-foot kit (GL-LINK-BATCH30) handles centralized rooms feeding multiple zones.
- Both kits ship the same probe set; only the sensor cable run differs.
- Place the unit close to the reservoir so the sensor cables drop into the active flow path.
- Probes pinned to a dead corner lag the real batch reading by several minutes, which matters during auto-correction.
- Standalone WiFi mode covers single-tank operations.
- Pairing with the Growlink HUB rolls the device into a wider automated nutrient dosing system.
- Shared logging, alerts, and recipe libraries cover every fertigation tank in the operation.
- Automated Fill Control: Triggers refill cycles when the level sensor drops below threshold, so a recirculating tank doesn't run dry mid-irrigation.
- Real-Time pH, EC, and Temperature Probes: High-accuracy sensors stream live data so the controller corrects nutrient drift before it shows up at the canopy.
- Growlink OS Recipe Automation: Set targets per crop stage and let the system mix, dose, and log every fill cycle without manual intervention.
- Standalone or HUB-Connected Operation: Run as a self-contained WiFi nutrient tank monitor or as a node inside a multi-tank Growlink HUB deployment.
- Technical Specifications
Specificaties
- Input Power
- 24VDC (via Growlink HUB or compatible PSU)
- Power Consumption
- 5W
- Operating Temperature
- 50–122°F (10–50°C)
- Operating Humidity
- 0–75% RH (non-condensing)
- Dimensions
- 7.75" × 7.75" × 3.75" (197 × 197 × 96 mm)
- Sensor Inputs
- pH, EC, Temperature, Tank Level
- Sensor Cable Lengths
- 10 ft (GL-LINK-BATCH) or 30 ft (GL-LINK-BATCH30)
- Standalone or HUB-Connected Operation
- Run as a self-contained WiFi nutrient tank monitor or as a node inside a multi-tank Growlink HUB deployment.
- SIZE
- 10' Sensor Cables, 30' Sensor Cables
Laten we ervoor zorgen dat het lukt voor jouw project.
Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.
Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.
Meer mogelijkheden voor uw ruimte
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Vragen en discussie
Heb je een vraag of iets nuttigs te delen? Start het gesprek.