Een slimmere manier om te groeien. Rechtstreekse groothandel vanuit de fabriek. Meer dan 15 jaar groeiende expertise

Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.

Growlink 4 Triac Out Module

Model / SKU: BMT-F-TO4 BACnet MS/TP

4-Channel Triac Output Module for Fast-Cycling Dosing Loads

Supply voltage
24 V AC/DC
Outputs
4 × solid-state triac
Mounting
TH35 DIN rail (IEC 60715)
ReferentieprijsEUR 221.97

Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.

Geen betaling vereist. Een gesprek over uw behoeften.

Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK

Nog wat meer informatie over dit product.

4-Channel Triac Output Module for Fast-Cycling Dosing Loads

Product details

  • The BMT-F-TO4 carries four solid-state triac outputs rated 0.8 A each at 24 V AC/DC.
  • Where a DO-4 relay would burn out chasing the rapid pulses an HE Anderson injection pump asks for, the triac switches stay clean.
  • The pump fires rhythmically at the injection rate the dosing recipe calls for, and BACnet MS/TP carries the setpoints from the Growlink controller.
  • BACnet MS/TP Triac Module with Manual Override on Every Channel
  • Each output gets a three-position black toggle.
  • Setting A lets Growlink software command the channel.
  • Setting 1 forces the triac on.
  • Setting 0 locks it off.
  • The module clips to a TH35 DIN rail and lands the BACnet line on spring-clamp terminals, so commissioning takes minutes per panel.
  • Wire it next to a BMT-F-DI4 or BMT-F-AOP4 for a full BACnet I/O stack on the same trunk.
  • 4 triac outputs at 0.8 A: Solid-state switching for fast-cycling AC loads like HE Anderson dosing pumps and small solenoid valves.
  • BACnet MS/TP communication: Plugs into the Growlink controller and any other BACnet trunk without protocol gateways.
  • Manual A/1/0 toggle per channel: Switch from software control to forced on or forced off without rewiring the panel.
  • 24 V AC/DC supply: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
  • TH35 DIN rail mount: Spring-clamp terminals snap into IEC 60715 rail for clean panel build-outs.
  • No mechanical relays to wear out: Triac switching handles the rapid pulse trains a relay would burn out on inside a season.
  • Stackable with BMT-F-DI4 / BMT-F-AOP4 / BMT-F-RTR: Build a full BACnet MS/TP I/O bank on one trunk with the Metz Connect family.
  • Technical Specifications

Specificaties

Outputs
4 × solid-state triac
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)

Laten we ervoor zorgen dat het lukt voor jouw project.

Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.

Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.

Laten we samen groeien.

Vragen en discussie

0

Heb je een vraag of iets nuttigs te delen? Start het gesprek.

BLIJF ONTDEKKEN

Meer mogelijkheden voor uw ruimte

Bekijk alle producten
HET BEGIN VAN IETS GOEDS

Laten we uw project tot leven brengen.

Vertel ons wat u precies nodig heeft. Wij gebruiken uw gegevens om een ​​passende reactie op uw groothandelsaanbod op te stellen.

Uw productlijst

Geen betaling. Geen verplichtingen. Gewoon een behulpzaam gesprek.