EEN NADERE KIJK
Nog wat meer informatie over dit product.
This bar is 44 in long, 2.2 in wide and just 1.4 in tall.
Product details
- It weighs about 2 lb 3 oz, light enough to clip under a rack shelf or hang from a trellis wire.
- It is rated at 70–85W and 110–190 µmol/s, depending on the spectrum.
- Efficacy spans 1.2 to 2.5 µmol/J across the range.
- The lower figures belong to the far-red and UV versions, which give up raw output for a narrow band.
- Input autosenses across 100–277V with no setting to change.
- Draw stays between 0.3A and 0.7A at 120V, so a long row of bars shares one circuit.
- A 120° optic spreads light evenly from close range.
- Cooling is passive, and there is no fan to clog in a humid rack.
- The fixture is cETL listed to UL 1598 for damp locations and carries CE marking.
- Lumen maintenance is rated at L70 beyond 150,000 hours.
- Running a Slim LED Grow Light Bar on Racks and Benches
- A slim led grow light bar earns its place where a panel fixture will not fit.
- On a vertical rack, the four-foot length matches a standard shelf, and one or two bars light greens or clones from a few inches away.
- Between greenhouse rows, growers hang the bars sideways to reach leaves the top lights miss.
- Research teams pick one spectrum per bench so a single variable changes at a time.
- Bring the bars in dimmed on the 0–10V line and raise output while you check for stretch or bleaching.
- The UV version needs extra caution, since too much exposure stresses leaves rather than helping them.
- Choose cord length before you mount anything.
- Short cords keep a rack tidy, and long cords save a junction box at the end of a row.
- Match the plug to the circuit as well, because the twist-lock and 240V plugs will not fit a home outlet.
- A dimming controller is not included, so plan one for the room.
- 44-inch slim profile: Matches a four-foot shelf and fits between rows where a panel light cannot go.
- Six spectra: PhysioSpec Indoor and Greenhouse, AnthoSpec, PrSpec, PfrSpec and UVSpec in the same bar format.
- Autosensing 100–277V input: Works on residential and commercial circuits with the matching plug.
- 0–10V dimming: Connects to a room controller for ramps and research dosing; controller sold separately.
- Passive, damp-rated build: No fans, and a UL 1598 damp-location listing for humid racks and greenhouses.
- Two cord lengths, four terminations: 6 ft or 15 ft cords with pigtails, NEMA 5-15P, 6-15P or L7-15P.
- Technical Specifications
Specificaties
- Model
- RAY 44-inch bar
- Power Draw
- 70–85W (by spectrum)
- PPF
- 110–190 µmol/s (by spectrum)
- Efficacy
- 1.2–2.5 µmol/J
- Spectrum Options
- PhysioSpec Indoor, PhysioSpec Greenhouse, AnthoSpec, PrSpec, PfrSpec, UVSpec
- Input Voltage
- 100–277V autosensing
- Current
- 0.3–0.7A @ 120V
- Dimming
- 0–10V (controller sold separately)
- Beam Angle
- 120°
- Dimensions
- 44 x 2.2 x 1.4 in
- Weight
- 2 lb 3 oz
- Certifications
- cETL, UL 1598 Damp Location, CE
- Cord Options
- 6 ft or 15 ft; pigtails, NEMA 5-15P, NEMA 6-15P, NEMA L7-15P
- Cord Size
- 6 ft, 15 ft
- Spectrum
- Indoor, PrSp, Green, Antho, UVSp, PfrSp
- Voltage - Plug Type
- 120 V - NEMA 5-15P, 240 V - NEMA 6-15P, 277 V - NEMA L7-15P, Pigtails
Vragen en discussie
Heb je een vraag of iets nuttigs te delen? Start het gesprek.