Een slimmere manier om te groeien. Rechtstreekse groothandel vanuit de fabriek. Meer dan 15 jaar groeiende expertise

Deze inhoud is momenteel beschikbaar in de oorspronkelijke taal.

Cap for MegaGarden

Model / SKU: MGCAP

What the MegaGarden Cap Actually Covers

Dimensions
About 4 x 4.1 x 0.4 in
Size
About 4 by 4.1 by 0.4 inches
Weight
About 0.01 lb
Quantity
One piece
ReferentieprijsEUR 1.68

Ter vergelijking. Vraag naar de actuele groothandelsprijs, beschikbaarheid en leveringsvoorwaarden.

Geen betaling vereist. Een gesprek over uw behoeften.

Fabrieksdirecte ondersteuningMeer dan 15 jaar ervaring
EEN NADERE KIJK

Nog wat meer informatie over dit product.

What the MegaGarden Cap Actually Covers

Product details

  • The MegaGarden is an ebb and flow system with a reservoir underneath and a grow tray sitting on top.
  • Getting to the tank normally means lifting the pots and the insert tray out, which nobody wants to do twice a day.
  • The porthole solves that, and this is the lid for it.
  • Pull the cap, read the level, take a conductivity reading, top up, put the cap back.
  • It measures roughly 4 in across and 0.4 in deep, and weighs about a hundredth of a pound.
  • The cap is red.
  • It arrives as a single piece with nothing to assemble.
  • The part number is MGCAP and it appears under the Hydrofarm and Active Aqua labels, which are related brands.
  • Leaving that port open is exactly what the cap exists to prevent.
  • Why Leaving the Reservoir Access Open Costs You
  • An open reservoir access port is three problems at once, and none of them announce themselves.
  • Light falling into nutrient solution grows algae, and algae in a tank ends up in a pump and then in the roots.
  • Open water evaporates, and as it goes the remaining solution concentrates, so conductivity climbs without anyone adding feed.
  • And an open hole lets in leaf litter, perlite, fungus gnats and whatever else is on the floor of the room.
  • A missing cap therefore shows up as a drifting reading and a green tank rather than as an obvious fault.
  • Keeping a spare in the drawer is sensible for exactly that reason, because these are easy to knock off a bench and lose.
  • Wipe the rim before seating it, since grit on the lip is what stops a cover sitting flat.
  • Treat the porthole as the routine inspection point and the rest of the system stays undisturbed.
  • Anyone whose system came without one, or who inherited a used unit, needs this before running nutrient.
  • It is the least expensive part on the whole system and the one most often absent.
  • What it is: The porthole cover for a MegaGarden reservoir
  • Why it matters: Check or top up the tank without lifting the grow tray
  • Size: About 4 by 4.1 by 0.4 inches
  • Weight: Around a hundredth of a pound
  • Part number: MGCAP
  • Labels: Branded both Hydrofarm and Active Aqua
  • Quantity: One piece, nothing to assemble
  • If it is missing: Light grows algae, water evaporates, debris gets in

Specificaties

Dimensions
About 4 x 4.1 x 0.4 in
Weight
About 0.01 lb
Quantity
One piece
Colour
Red
Size
About 4 by 4.1 by 0.4 inches

Laten we ervoor zorgen dat het lukt voor jouw project.

Vermeld in uw aanvraag de gewenste hoeveelheid, de bezorgbestemming, het teeltgebied en eventuele spannings- of stekkervereisten. Specificaties, beschikbaarheid, verzending en garantievoorwaarden worden bevestigd in uw schriftelijke offerte.

Referentieconversie met behulp van de opgeslagen wisselkoers van datum 15 nov. 2026. De omgerekende bedragen zijn geen offerte.

Laten we samen groeien.

Vragen en discussie

0

Heb je een vraag of iets nuttigs te delen? Start het gesprek.

BLIJF ONTDEKKEN

Meer mogelijkheden voor uw ruimte

Bekijk alle producten
HET BEGIN VAN IETS GOEDS

Laten we uw project tot leven brengen.

Vertel ons wat u precies nodig heeft. Wij gebruiken uw gegevens om een ​​passende reactie op uw groothandelsaanbod op te stellen.

Uw productlijst

Geen betaling. Geen verplichtingen. Gewoon een behulpzaam gesprek.