이 콘텐츠는 현재 원어로 제공됩니다.
컨트롤러 및 계량기도매 문의
Water Content Sensor 3 with splitter cable set
모델/SKU: WCS-3
This probe reports the moisture in a grow medium as volumetric water content, shown as a percentage.
- Power
- 12 V DC, 100 to 200 mA
- Package size
- 170 x 90 x 54 mm
- Model
- WCS-3
- Connection
- M12, daisy-chain
출처 참조 가격KRW 158,590
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
This probe reports the moisture in a grow medium as volumetric water content, shown as a percentage.
Product details
- What the TrolMaster WCS-3 Measures
- Three slim prongs slide into coco coir, rock wool or soil with little displacement, even in small cubes.
- A built-in LCD wakes when the sensor is tapped or moved and shows the live VWC reading.
- Data also flows to the controller, which can raise alarms and send mobile alerts when moisture passes a setpoint.
- Sensors connect over M12 cable and daisy-chain with the included T-splitter.
- Aqua-X Pro and Hydro-X Pro accept up to 50 sensors, Aqua-X Plus up to 20, Aqua-X up to 8 and Tent-X one.
- The probe runs on 12 V supplied by the system and draws 100 to 200 mA.
- It is rated for 32 to 122 °F and below 90% humidity, and carries CE, FCC and ETL marks.
- The set includes the sensor, an M12 T-splitter and a 4 ft M12 cable.
- Using a Water Content Sensor to Steer Irrigation
- A water content sensor turns irrigation timing from guesswork into a number the whole team can read.
- Insert the prongs fully into the substrate, keeping them away from the pot wall and the drip emitter.
- Place sensors in blocks or pots that represent the room, not the wettest or driest corner.
- Watch the overnight dryback, the drop in VWC between the last and first irrigation.
- A larger dryback pushes plants toward generative growth, while a smaller one keeps them vegetative.
- Set high and low alarms so the controller flags a stuck valve or a failed pump quickly.
- Link the readings to Aqua-X so pump events can start or stop on moisture rather than the clock alone.
- Add sensors across zones as the room grows, chaining them with M12 splitters.
- Keep the probe clean and reseat it after each media change so readings stay comparable.
- Log the data across a crop to fine-tune the next run.
- With steady readings, irrigation decisions become repeatable from one harvest to the next.
- VWC readings: Moisture shown as a percentage of the medium.
- Slim three-prong probe: Fits small rock wool cubes and coco pots.
- Tap-to-wake LCD: Live reading at the plant without opening the app.
- M12 daisy-chain: Up to 50 sensors on Aqua-X Pro or Hydro-X Pro.
- Alerts and crop steering: Setpoint alarms and mobile notifications.
- Technical Specifications
명세서
- Model
- WCS-3
- Connection
- M12, daisy-chain
- Power
- 12 V DC, 100 to 200 mA
- Certifications
- CE, FCC, ETL
- Package size
- 170 x 90 x 54 mm
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.