이 콘텐츠는 현재 원어로 제공됩니다.
컨트롤러 및 계량기도매 문의
TrolMaster Sensor Bracket (2-pack)
모델/SKU: TSB-1
How the TrolMaster TSB-1 Holds a Sensor
- Package size
- 85 x 68 x 67 mm
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
출처 참조 가격KRW 21,323
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
How the TrolMaster TSB-1 Holds a Sensor
Product details
- This set contains two holders that work together to mount one sensor.
- TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
- Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
- Each holder fixes flat to a wall or post.
- Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
- The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
- That matters because a swinging sensor reads the air in a different spot from one minute to the next.
- The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
- The pack ships in a box about 85 x 68 x 67 mm.
- Placing a Sensor Mounting Bracket for Accurate Readings
- A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
- TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
- The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
- Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
- Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
- Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
- Seat the sensor and route its cable along the wall so it does not pull on the housing.
- Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
- In larger rooms, a set for each sensor keeps every reading consistent.
- Wipe dust off the sensor during routine cleaning.
- Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
- Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
- Two holders per pack: Together they mount one sensor.
- Curved locking edges: Hold the sensor firmly in place.
- Joinable design: Holders link with a mortise-and-tenon joint.
- Technical Specifications
명세서
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
- Mounting
- Wall mount, joinable holders
- Package size
- 85 x 68 x 67 mm
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.