더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

TrolMaster Dual System Control Adapter (DCC-2)

모델/SKU: DCC-2

TrolMaster DCC-2 Puts One Device Under Two Controllers

Input voltage
12 VAC
Package dimensions
6.14 × 3.27 × 1.18 in (156 × 83 × 30 mm)
Compatible modules
DSC-1, DSH-1/2, DST-1/2, DSP-1, DSD-1, DSV-1
Maximum current
0.2A
출처 참조 가격KRW 139,618

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

TrolMaster DCC-2 Puts One Device Under Two Controllers

Product details

  • A single exhaust fan often has more than one job in a grow room.
  • It may need to clear CO2 when levels run high and also run on a night-time schedule.
  • The DCC-2 lets two separate controllers share that one device instead of adding a second fan and module.
  • It plugs into one of TrolMaster's plug-in device stations through its built-in RJ12 lead.
  • Supported modules are the DSC-1, DSH-1/2, DST-1/2, DSP-1, DSD-1 and DSV-1.
  • Each side of the adapter, Section A and Section B, is addressed to a different controller.
  • A typical pairing puts a Hydro-X on one side and a Carbon-X on the other.
  • Each side can be registered as a temperature, humidity, CO2 or timer function.
  • Once linked, the adapter replaces the module's original preset with the functions you assign.
  • The package measures 6.14 × 3.27 × 1.18 in and weighs 0.11 lbs.
  • Series or Parallel: Setting the Dual System Control Adapter Interlock
  • The interlock setting decides how the two conditions combine.
  • With interlock on, both conditions must be true before the device runs, which is a series setup.
  • For example, an exhaust fan could run only when CO2 and humidity are both above setpoint.
  • With interlock off, either condition can start the device on its own, which is a parallel setup.
  • That suits a fan that should run for high CO2 or during a scheduled night-time air exchange.
  • Toggling the interlock on either section changes both sections together.
  • A quick press of Mode picks the module type, and holding it for three seconds resets the adapter.
  • A quick press of Add registers it with the controller, and holding Add for three seconds switches the interlock.
  • The reset button does not clear the link on HCS-2 or NFS-2 controllers, so use the controller menu there.
  • It is rated for rooms from 32 to 122°F at up to 90% relative humidity.
  • Two Controllers, One Module: Address Section A and Section B to separate controllers so both can drive the same device.
  • Series or Parallel Interlock: Choose whether both conditions or either condition switches the device on.
  • Four Function Types: Register each side as temperature, humidity, CO2 or timer control.
  • Built-In RJ12 Lead: Plugs straight into a supported plug-in device station with no extra cable.
  • Fewer Duplicate Devices: One fan or dehumidifier can serve two control strategies instead of a second unit.
  • Technical Specifications

명세서

Compatible modules
DSC-1, DSH-1/2, DST-1/2, DSP-1, DSD-1, DSV-1
Input voltage
12 VAC
Maximum current
0.2A
Operating temperature
32–122°F (0–50°C)
Operating humidity
≤90% RH
Package contents
1 × DCC-2 adapter
Package dimensions
6.14 × 3.27 × 1.18 in (156 × 83 × 30 mm)
Gross weight
0.11 lbs (0.05 kg)
Series or Parallel
Setting the Dual System Control Adapter Interlock
Series or Parallel Interlock
Choose whether both conditions or either condition switches the device on.
Four Function Types
Register each side as temperature, humidity, CO2 or timer control.

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.