더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

TrolMaster DSP-2 240V Program Device Station

모델/SKU: DSP-2

How the TrolMaster DSP-2 Runs Timed Loads

Input voltage
100 to 240 VAC, 50/60 Hz
Output voltage
100 to 240 VAC, 50/60 Hz
Package size
85 x 80 x 90 mm
Model
DSP-2
출처 참조 가격KRW 117,279

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

How the TrolMaster DSP-2 Runs Timed Loads

Product details

  • This module turns a Hydro-X or Aqua-X controller into a scheduler for any device that runs on time.
  • It accepts 100 to 240 VAC at 50/60 Hz and switches the same voltage out to the load.
  • Output is rated at 10 A, enough for pumps, UV sterilisers, circulation gear and small lighting loads.
  • A single RJ12 socket carries the link back to the controller, where cycle and program schedules are set.
  • One press of the small addressing button pairs the station with the controller during setup.
  • The LED reads fast green when unpaired, slow green when paired and off, and solid green when the load is running.
  • A blinking red light signals an overload, and unplugging the station clears it.
  • Holding the override button switches the load on or off without touching the stored schedule.
  • The box holds the station, a 16 ft RJ12 cable, a 4 ft RJ12 cable and an RJ12 T-splitter.
  • Wiring a 240V Program Device Station Into a Grow Room
  • A 240V program device station suits rooms built on dedicated 240 V circuits, where every timed load shares the same supply.
  • Plug the station into its outlet, then plug the device into the station.
  • Run the long RJ12 cable from the controller and use the T-splitter to chain the next module along the line.
  • Press the addressing button once and wait for the slow green light before building the schedule.
  • Pumps with a high start-up draw deserve extra headroom below that figure.
  • Mount the station off the floor and away from spray, since it works in up to 90 percent humidity, not wet conditions.
  • Label each station with its address so a reset or swap goes quickly during a busy week.
  • Use the override during maintenance to stop a pump without editing the program.
  • Set up this way, timed equipment across the room follows one controller and one clock.
  • 100 to 240 VAC input and output: Works on 240 V room circuits at 50/60 Hz.
  • 10 A output: Handles pumps, sterilisers, fans and small lighting loads.
  • One-button addressing: Pairs with a Hydro-X or Aqua-X controller in seconds.
  • Status LED: Shows paired, running and overload states at a glance.
  • Manual override: Switches the load without changing the stored schedule.
  • Technical Specifications

명세서

Model
DSP-2
Input voltage
100 to 240 VAC, 50/60 Hz
Output voltage
100 to 240 VAC, 50/60 Hz
Output current
10 A
Compatible controllers
Hydro-X, Aqua-X
Connection
RJ12 socket
Package size
85 x 80 x 90 mm
Gross weight
0.34 kg
Status LED
Shows paired, running and overload states at a glance.

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.