이 콘텐츠는 현재 원어로 제공됩니다.
컨트롤러 및 계량기도매 문의
Sensorex TDS Sensor
모델/SKU: CS150TC-K-1.0-P1K-10-BNC-TL
Reading EC with the Growlink Sensorex CS150 TDS Sensor
- SIZE
- 10' Cable, 30' Cable
- Sensor Type
- Contacting conductivity / TDS, graphite electrodes
- Probe Diameter
- 12 mm
- Temperature Element
- PT1000 (Automatic Temperature Compensation)
출처 참조 가격KRW 265,875
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
Reading EC with the Growlink Sensorex CS150 TDS Sensor
Product details
- The Growlink Sensorex CS150 TDS Sensor reads conductivity and total dissolved solids on a 12 mm graphite contacting probe rated for lab and light-industrial use.
- The cell constant is K=1.0, which covers the standard hydroponic feed range.
- A built-in PT1000 temperature element feeds Automatic Temperature Compensation back through the same cable.
- EC reads stay honest across reservoir temperature swings.
- Terminations include a BNC connector for instrumentation and tinned leads for transmitter wiring.
- The body is plastic with graphite measuring surfaces.
- Operating range is 0–70°C / 32–158°F.
- Tank or In-Line Mounting and Sensorex CX-Series Wiring
- The probe handles two install paths.
- Drop it into a tank for submerged reads.
- The in-line option uses an FC50P or FC75P gland and nut fitting through a tee, sized for ½″ and ¾″ NPT pipes.
- The lab cable variant talks to the Sensorex CM1000 meter.
- The 10ft and 30ft process cables wire into Sensorex CX-series transmitters such as the CX105, CX2000, CX2000RS, and CX3100.
- Pick the cable length that matches the run from probe to transmitter.
- Clean the graphite surface with gentle detergent or 5% HCl in a small cup between batches.
- The Sensorex CS150 conductivity sensor holds calibration through the cleaning cycle.
- Most rooms work through two probes a season once a graphite element has logged enough hours in high-EC drainback.
- Pair this graphite EC/TDS sensor with a Sensorex transmitter for continuous logging through the run.
- Keep a spare on the shelf for swap-day during summer drainback peaks.
- A spare cuts downtime when a probe needs cleaning mid-bloom.
- 12 mm Graphite Contacting Probe: Cost-effective EC/TDS read for lab and light-industrial reservoir or in-line use.
- K=1.0 Cell Constant: Sized for the standard hydroponic feed range — good resolution from veg through bloom EC values.
- PT1000 Temperature Element: Automatic Temperature Compensation built into the cable keeps EC readings honest across tank temp swings.
- BNC + Tinned Lead Terminations: BNC plugs into instrumentation; tinned leads land on Sensorex CX-series transmitter terminals.
- Tank or In-Line Mounting: Submerge in the reservoir or install in a tee with FC50P (½″ NPT) or FC75P (¾″ NPT) gland fittings.
- Technical Specifications
명세서
- Sensor Type
- Contacting conductivity / TDS, graphite electrodes
- Probe Diameter
- 12 mm
- Temperature Element
- PT1000 (Automatic Temperature Compensation)
- Connector / Termination
- BNC + tinned leads (TL)
- Cable Length Options
- 10 ft (3 m) or 30 ft (9 m)
- Body Material
- Plastic body, graphite measuring surfaces
- Mounting
- Submersible in tank, or in-line via FC50P (½″ NPT) / FC75P (¾″ NPT)
- Compatible Transmitters
- Sensorex CX105, CX2000, CX2000RS, CX3100 (process cable); CM1000 (lab cable)
- Tank or In-Line Mounting
- Submerge in the reservoir or install in a tee with FC50P (½″ NPT) or FC75P (¾″ NPT) gland fittings.
- SIZE
- 10' Cable, 30' Cable
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.