이 콘텐츠는 현재 원어로 제공됩니다.
환기 및 온도 조절도매 문의
Ruck 4 Back Draught Dampner
모델/SKU: 148389
How the 4 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
출처 참조 가격KRW 24,049
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
How the 4 Inch Back Draught Damper Seals an Idle Duct
Product details
- This is a one-way gate in the duct.
- Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
- The housing is galvanized sheet steel.
- On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
- Mounting a Backdraft Shutter in the Right Place
- It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
- Fit it downstream of the fan with the flaps opening in the direction of flow.
- Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
- Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
- On a small run the flaps are light enough to open at low fan speed without stalling.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
명세서
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기당신의 공간을 위한 더 많은 가능성
환기 및 온도 조절
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
출처 참조KRW 186,981
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.