더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

Ruck 12 Back Draught Dampner

모델/SKU: 149477

How the 12 Inch Back Draught Damper Seals an Idle Duct

Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
출처 참조 가격KRW 52,106

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

How the 12 Inch Back Draught Damper Seals an Idle Duct

Product details

  • At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
  • The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
  • Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
  • Mounting a Backdraft Shutter in the Right Place
  • Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
  • Install it after the fan, flaps opening downstream.
  • There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
  • Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
  • A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

명세서

Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.