더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

Quest Duct Kit (Q100)

모델/SKU: 4042265

Its part number is 4042265, and Quest builds it for the Quest 100 dehumidifier, PN 4041870, and the 50 Hz version, PN 4046590.

출처 참조 가격KRW 273,891

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

Its part number is 4042265, and Quest builds it for the Quest 100 dehumidifier, PN 4041870, and the 50 Hz version, PN 4046590.

Product details

  • What Is in the Quest 100 Duct Kit
  • Each one carries a round collar for duct, so the unit can draw from one space and deliver to another.
  • That is what lets a Quest 100 sit in a lung room, a hallway or a mechanical closet.
  • It still works the grow room through two runs of flex duct.
  • The filter stays in service.
  • The magnetic door closes over it, so a filter change is a pull and a push rather than a plenum removal.
  • Fitting it needs a portable drill, a T25 Torx driver and a 5/16 in hex driver, and nothing else.
  • The plenums hang on the cabinet's own panel screws.
  • Those screws back out halfway, the plenum's keyed slots drop over them, and the screws are tightened again.
  • The four fasteners then anchor the plenum tabs into the plastic base, self-drilling, with no pilot holes.
  • Quest's instructions open with the warning that matters: disconnect the dehumidifier from power before any of it starts.
  • The kit ships at about 5 lb.
  • Keep both runs as short and as straight as the room allows, and size them to the collars rather than necking down.
  • Back the two top panel screws and the two right panel screws out halfway, hang the plenum on them, and tighten.
  • Drive the two fasteners through the bottom tabs into the base.
  • Slide the filter in, arrow toward the machine, and close the magnetic door with the larger tab on top.
  • Then the supply side: four screws out halfway on the top, rear and left panels, plenum on, screws tight, two more fasteners into the base.
  • Seal the duct to each collar with foil tape rather than cloth tape.
  • A dehumidifier discharge is warm, and cloth adhesive lets go within a season.
  • Check the filter monthly once it is ducted.
  • Out of sight behind a door, a filter loads up faster than one on an open cabinet.
  • A loaded filter is the second reason a ducted unit underperforms.
  • Four self-drilling fasteners: Anchor the plenums to the base with no pilot holes.
  • Hangs on the panel screws: Keyed slots over half-backed screws, then tightened.
  • Three tools: Portable drill, T25 Torx driver, 5/16 in hex driver.
  • For the Quest 100: PN 4041870, and the 50 Hz PN 4046590.
  • Quest part 4042265: About 5 lb boxed.
  • Technical Specifications

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.