이 콘텐츠는 현재 원어로 제공됩니다.
환기 및 온도 조절도매 문의
Quest Duct Kit (Hi-E 195)
모델/SKU: 4039132
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
출처 참조 가격KRW 247,170
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
Product details
- This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
- A duct cover plate blocks off the opening the ducted setup no longer uses.
- Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
- Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
- The installation sheet for the kit is TS-1059, written for the Hi-E series.
- The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
- Nothing else is needed from the dehumidifier side.
- Flex or rigid duct in matching sizes completes the run.
- Why Growers Fit a Dehumidifier Duct Kit
- A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
- That keeps its heat and noise out of the room and frees floor space for plants.
- Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
- Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
- Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
- Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
- Plan the drain line at the same time, since a remote unit still needs a path for condensate.
- The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
- 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
- Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
- Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
- Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
- Technical Specifications
명세서
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기당신의 공간을 위한 더 많은 가능성
환기 및 온도 조절
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
출처 참조KRW 186,981
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.