이 콘텐츠는 현재 원어로 제공됩니다.
환기 및 온도 조절도매 문의
Quest 335 Duct Kit
모델/SKU: 4042685
What the Quest 335 Duct Kit Includes
- Duct diameter
- 16 in
- Compatible models
- Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
- Remote mounting
- Run the unit from a mechanical room or ceiling.
출처 참조 가격KRW 567,824
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
What the Quest 335 Duct Kit Includes
Product details
- This factory accessory converts a Quest 335 from a free-hanging unit into a ducted dehumidifier.
- In the box are an intake duct adapter, a duct adapter face, a duct plenum face and an exhaust duct plenum.
- Ten #10-24 hex-slotted screws and a 1/8 in drill bit come with it for fastening the parts to the cabinet.
- Both connections take 16 in round duct.
- Quest part number 4042685 fits the Quest 335 at 208/230 V (4042500) and at 277 V (4042600).
- It also fits the 50 Hz Quest 375 (4046200-NC).
- The 335 moves 900 CFM at 0.6 in WG with duct collars fitted, so the blower has pressure to spare for a short run.
- That lets the dehumidifier sit in a mechanical room or above a ceiling while dry air still reaches the canopy.
- Planning a Run With a Dehumidifier Duct Kit
- A dehumidifier duct kit makes sense when room space is tight, or when the unit's noise and heat belong somewhere else.
- Give each dehumidifier its own duct system rather than tying it into a fan or HVAC line.
- Keep each run to about 25 ft and as straight as possible, since every elbow adds resistance.
- Rigid pipe on a direct path holds airflow better than flex duct routed around obstacles.
- Drill only within the safe zones shown in the Quest 335 manual so screws stay clear of coils and wiring.
- Aim the discharge across the canopy or into a circulation path so dry air mixes instead of pooling.
- Seal every joint with foil tape to stop the unit pulling in air from the plenum space.
- Leave room to reach the end access panel, because the 22 x 20 x 2 in MERV-13 filter still needs regular changes.
- Installed this way, the 335 keeps its rated capacity while staying out of the growing space.
- 16 in connections: Round duct on both intake and discharge.
- Complete hardware: Adapters, plenum, screws and drill bit included.
- Factory fit: Quest part 4042685 for the Quest 335 cabinet.
- Remote mounting: Run the unit from a mechanical room or ceiling.
- Technical Specifications
명세서
- Duct diameter
- 16 in
- Compatible models
- Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
- Remote mounting
- Run the unit from a mechanical room or ceiling.
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기당신의 공간을 위한 더 많은 가능성
환기 및 온도 조절
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
출처 참조KRW 186,981
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.