이 콘텐츠는 현재 원어로 제공됩니다.
수경재배 및 관개도매 문의
Netafim 3/4in Insert Coupling with Rings - 100 Pack
모델/SKU: 32500-021530
Netafim 3/4in Insert Coupling with Rings
- Nominal Size
- 3/4 inch
- Fitting Type
- Straight coupling, barb x barb
- Pipe Inside Diameter
- 22 mm
- Pipe Wall Thickness
- 1.5 mm
출처 참조 가격KRW 123,745
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
Netafim 3/4in Insert Coupling with Rings
Product details
- Supply pipe and heavy wall dripline both get cut, extended and rerouted over the life of a system.
- This straight insert fitting joins two pieces end to end so the run carries on as one line.
- Each half of the coupling carries a series of raised rings.
- Those rings are the barb, and each one bites into the inside of the pipe as it slides on.
- Several rings in a row give the joint more grip than a single ridge.
- Its brown color and part number match the 25 mm barb coupling in Netafim's connector catalog.
- Netafim lists that size for pipe with a 22 mm inside diameter and a 1.5 mm wall.
- Netafim describes the barb connector body as a UV and chemical resistant polymer.
- That matters on exposed runs and in lines that carry fertilizer.
- The fitting is a single molded piece with no nuts, sleeves or loose seals.
- Installation takes a sharp cutter and hand pressure, nothing more.
- A bag of 100 covers a full season of repairs and new lateral work across a large site.
- Making a Barbed Pipe Coupling Hold
- Turn the zone off and drain the pressure before cutting the line.
- Cut out any damaged section and square both pipe ends.
- A clean, straight cut lets the pipe seat evenly over all the rings.
- Check the pipe size against the fitting before pushing it on.
- Warm stiff pipe in the sun or in warm water so it stretches over the rings more easily.
- Push one pipe end onto the coupling with a slight twisting motion until it covers every ring.
- Repeat on the other side so both pipes meet near the middle.
- Do not use oil or soap on the barbs.
- A dry fit grips better.
- Turn the zone on slowly and watch both joints at working pressure.
- A small leak usually means the pipe did not slide fully over the last ring.
- On buried or exposed pipe, keep the joint straight and out of tension so the pipe does not pull back off.
- Flush the line after a repair to clear out soil and pipe shavings.
- Store spare couplings in their bag, away from sun, until they are needed.
- Ringed Barbs: Multiple raised rings grip the inside of the pipe.
명세서
- Fitting Type
- Straight coupling, barb x barb
- Nominal Size
- 3/4 inch
- Pipe Inside Diameter
- 22 mm
- Pipe Wall Thickness
- 1.5 mm
- Color
- Brown
- Material
- UV and chemical resistant polymer
- Pack Quantity
- 100
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.