이 콘텐츠는 현재 원어로 제공됩니다.
컨트롤러 및 계량기도매 문의
Matrix MC2 Controller
모델/SKU: 10-010701-056
Matrix MC2 Controller for Multi-Channel LED Fixture Management
- Adapter Input
- 100-240V, 50/60Hz 0.2A
- Controller Input
- 12V, 1A
- Lighting Control Channels
- 2
- Lighting Control Level
- OFF / 25% / 40% / 50% / 60% / 80% / 100%
출처 참조 가격KRW 265,875
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
Matrix MC2 Controller for Multi-Channel LED Fixture Management
Product details
- The Matrix MC2 provides two independent lighting control channels, each capable of managing up to 100 fixtures via RS-485 or 80 fixtures via 0-10V — giving a single controller reach across up to 200 fixtures total in a facility.
- Each channel controls Far Red, UV, and Full Spectrum outputs independently with separate on/off timing and dimming settings, so growers can run different spectral recipes on different fixture groups without needing a second controller.
- Dimming steps at 25%, 40%, 50%, 60%, 80%, and 100% with full off, providing enough granularity to match light intensity to plant stage across veg, bloom, and transition zones from one unit.
- Custom Lighting Schedules and Grouped LED Grow Light Control
- The MC2 supports grouped fixture control within the same daisy chain, meaning growers can run separate lighting strategies in a single room — one group in veg spectrum while another runs bloom, or stagger EOD far-red timing across zones.
- Custom presets let operators build, save, and recall specific lighting recipes so spectral settings stay consistent cycle after cycle without manual reprogramming.
- Connection runs through RJ12 plug-and-play daisy-chain for fast installation — no custom wiring or network configuration required.
- The controller accepts 100–240V input through its adapter, operates across -4°F to 176°F ambient temps, and monitors humidity from 0–100% for environmental awareness alongside lighting control.
- 2 Independent Channels, 200 Fixture Capacity: Each channel handles up to 100 fixtures on RS-485, allowing separate lighting strategies per channel from a single controller.
- Far Red / UV / Full Spectrum Independent Control: Adjusts each spectral channel's dimming and on/off timing separately to build precise light recipes matched to each growth phase.
- Grouped Control Within Daisy Chains: Runs different fixture groups on different schedules within the same wired chain — no extra controllers needed for multi-zone rooms.
- Custom Presets and Programmable Schedules: Save and recall spectral recipes for repeatable lighting programs across production cycles without manual reconfiguration.
- RJ12 Plug-and-Play Daisy Chain: Standard RJ12 connections between fixtures and controller keep installation fast and eliminate the need for custom wiring or network setup.
명세서
- Adapter Input
- 100-240V, 50/60Hz 0.2A
- Controller Input
- 12V, 1A
- Lighting Control Channels
- 2
- Lighting Control Level
- OFF / 25% / 40% / 50% / 60% / 80% / 100%
- Temperature Range
- -20-80°C (-4-176°F)
- Humidity Range
- 0-100%
- Far Red / UV / Full Spectrum Independent Control
- Adjusts each spectral channel's dimming and on/off timing separately to build precise light recipes matched to each growth phase.
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.