이 콘텐츠는 현재 원어로 제공됩니다.
수경재배 및 관개도매 문의
Growlink Valve LINK
모델/SKU: GL-LINK-VALVE
Growlink valveLINK Irrigation Controller for Precision Crop Steering
- Input Power
- 24VDC, max 2.7A combined
- Dimensions
- 7.75" × 7.75" × 3.75"
- Outputs
- 8× Sourcing FETs (24VDC valve control)
- Valve Compatibility
- 24VDC solenoids (not 24VAC)
출처 참조 가격KRW 399,481
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
Growlink valveLINK Irrigation Controller for Precision Crop Steering
Product details
- The Growlink valveLINK Irrigation Controller drives up to eight independent solenoids or DC valves.
- Each channel runs through 24VDC sourcing FETs rated 1A per output and 2.7A combined.
- Each output ties directly into Growlink OS, where Copilot can build crop-steering programs that adjust shot count, duration, and timing per zone.
- The unit pairs over WiFi for standalone use or connects to a Growlink HUB via the included 10-foot RJ-45 cable for wired installs.
- Operating range covers 50–122°F (10–50°C) and 0–75% RH non-condensing, suitable for greenhouse and indoor cultivation.
- Eight-Zone Drip Schedules from a Precision Irrigation Controller
- Map each channel to one irrigation zone — bench, table, or plant block.
- The precision irrigation controller fires the matching valve when the Copilot program calls a shot.
- Place the controller centrally enough that valve runs stay under the FET's 1A current limit per channel.
- 24V latching solenoids draw more on the pull pulse, so size cable gauge and split high-draw valves across channels.
- For larger facilities, scale by adding additional valveLINK units to the same Growlink OS account.
- Channels stay logically grouped under zone names rather than module IDs.
- Sensor-based mode pairs well with substrate moisture probes.
- The controller delays the next shot until water content drops past the dryback target, which is core to crop steering.
- Note 24VAC solenoids aren't compatible — these outputs are DC sourcing FETs, so verify the valve coil type before wiring.
- 8 Independent Channels (1A Each, 2.7A Combined): Drive up to eight 24VDC irrigation valves on dedicated sourcing FETs sized for typical solenoid duty.
- Growlink Copilot Crop Steering: Build dryback-aware shot programs that adapt by zone, substrate sensor input, or feeding stage.
- WiFi Standalone or HUB Wired Mode: Pair to Growlink OS over WiFi for solo setups or plug into a Growlink HUB via the included RJ-45 cable.
- Flexible Control Modes: Run manual, schedule-based, or sensor-triggered irrigation across all eight channels.
- Made in the USA: Built for demanding greenhouse and indoor agricultural environments with serviceable construction.
- Technical Specifications
명세서
- Input Power
- 24VDC, max 2.7A combined
- Outputs
- 8× Sourcing FETs (24VDC valve control)
- Valve Compatibility
- 24VDC solenoids (not 24VAC)
- Connectivity
- WiFi (standalone) or RJ-45 to Growlink HUB
- Operating Temperature
- 50–122°F (10–50°C)
- Operating Humidity
- 0–75% RH (non-condensing)
- Dimensions
- 7.75" × 7.75" × 3.75"
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.