더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

Growlink Level Sensor (for Batch TankLINK)

모델/SKU: GL-LINK-LEVEL

Reading Tank Level with the Growlink Batch TankLINK Level Sensor

Sensor Type
Float / serpentine pontoon
Output Signal
4–20mA analog
Connector
Molex (1× 4–20mA input on controller)
Compatible Controller
Growlink Batch TankLINK (alongside pH, EC, Temp inputs)
출처 참조 가격KRW 132,270

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

Reading Tank Level with the Growlink Batch TankLINK Level Sensor

Product details

  • The Growlink Batch TankLINK Level Sensor floats a serpentine pontoon directly in the nutrient tank.
  • The pontoon's shape lets the assembly drop through narrow tank openings without disassembly.
  • The transducer translates that movement into a 4–20mA signal.
  • A Molex connector carries the signal to the controller's level input.
  • That feed drives the TankLINK's refill logic and overfill alarms.
  • The controller can call a fill pump on or trip an alert before the tank crosses either threshold.
  • Wiring the TankLINK Level Sensor into the Same Tank as pH, EC, and Temp
  • Most growers position this TankLINK level sensor in the same tank that already holds the pH, EC, and temperature probes.
  • A single Batch TankLINK runs all four inputs from one board.
  • The 4–20mA output is the standard analog type the controller's level input expects.
  • The nutrient tank level sensor wires in with no protocol conversion.
  • Plug-and-play installation keeps a sensor swap to a few minutes during tank teardown.
  • Lift the pontoon, unplug the Molex, drop in the new unit, and the controller picks the reading back up at the next sample cycle.
  • Tank cleaning between runs is the most common time to inspect the pontoon for scale buildup.
  • A wipe with a soft cloth keeps the batch tank level sensor reading honest across the next harvest cycle.
  • The continuous 4–20mA reading also pairs with the controller's logged history for season-over-season fill-rate analysis.
  • That helps spot a slow leak or a clogged refill solenoid before the next crop suffers a dry-tank hour.
  • 4–20mA Analog Output: Standard signal type wired straight into the Batch TankLINK controller's level input.
  • Molex Connector Wiring: Plug-and-play swap during teardown — unplug, lift, replace, plug back in.
  • Automated Refill + Overfill Logic: Feeds the controller's level thresholds for pump triggers and alert calls before the tank crosses either.
  • Continuous Level Tracking: Real-time reading across the full tank stroke, not just point-level high/low switches.
  • Technical Specifications

명세서

Sensor Type
Float / serpentine pontoon
Output Signal
4–20mA analog
Connector
Molex (1× 4–20mA input on controller)
Compatible Controller
Growlink Batch TankLINK (alongside pH, EC, Temp inputs)
Molex Connector Wiring
Plug-and-play swap during teardown — unplug, lift, replace, plug back in.

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.