이 콘텐츠는 현재 원어로 제공됩니다.
조명 액세서리도매 문의
Growlink Digital Light LINK
모델/SKU: GL-LINK-LIGHTD
Spectrum, Intensity, and Timing on the Growlink Digital lightLINK
- Input Power
- 24VDC via Growlink HUB (RJ-45)
- Zone Coverage
- 1 zone per module (one Digital lightLINK per zone)
- Dimensions
- 7.75″ × 7.75″ × 3.75″
- Current / Consumption
- 1A, 3W typical
출처 참조 가격KRW 199,072
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
Spectrum, Intensity, and Timing on the Growlink Digital lightLINK
Product details
- The Growlink Digital lightLINK runs spectrum, intensity, and timing for any lighting zone wired to the Growlink HUB.
- The controller talks to compatible fixtures over an RJ-12 data port or a terminal block, depending on the brand.
- That covers ThinkGrow, Dutch Lighting Innovations, Phantom PX Digital, Synce, Fohse, and other digital-protocol fixtures.
- Power comes from the HUB over the RJ-45 connection at 24VDC, 1A, 3W typical.
- One module covers one lighting zone.
- Larger rooms run one digital lighting controller per zone so each zone holds its own schedule and ramp.
- Wiring the LINKS Lighting Controller for Sunrise, Sunset, and Safety
- The controller relies on a canopyLINK and ClimaLINK sensor connected to the HUB for High Heat Shutdown.
- That's the safety logic that drops the zone if temperature climbs out of range.
- Sunrise and sunset transitions ramp the lights in over a configurable window at the start and end of each photoperiod.
- That smooths the stress hit plants take during a hard on/off cycle.
- Spectrum control adjusts the channel mix on multi-band LEDs through the same digital line.
- Operating range is 50–122°F and 0–75% RH non-condensing — fits inside any standard control enclosure.
- The box itself runs 7.75″ × 7.75″ × 3.75″ and ships with a mounting kit, a 10 ft RJ-45 cable, and a screwdriver for the terminal-block wiring.
- RJ-12 + Terminal Block Outputs: Talks to compatible fixtures over the digital port their brand uses — no protocol converters needed.
- Multi-Brand Fixture Support: Works with ThinkGrow, Dutch Lighting Innovations, Phantom PX Digital, Synce, Fohse, and more.
- Sunrise / Sunset Ramping: Configurable ramp window at the start and end of each photoperiod smooths the plant's transition.
- Full Spectrum + Intensity Control: Adjusts channel mix on multi-band LEDs and overall intensity from veg through bloom.
- 24VDC Power via HUB: Pulls 1A, 3W typical over the RJ-45 link — no separate brick at the controller end.
- High Heat Shutdown Safety: Cuts the zone when canopyLINK or ClimaLINK reports out-of-range temps to the HUB.
- Mounting Kit + 10 ft RJ-45 Included: Ships ready to install — screwdriver, mounting hardware, and the HUB-to-controller cable in-box.
- Technical Specifications
명세서
- Input Power
- 24VDC via Growlink HUB (RJ-45)
- Current / Consumption
- 1A, 3W typical
- Fixture Outputs
- RJ-12 data port + terminal block
- Compatible Fixtures
- ThinkGrow, Dutch Lighting Innovations, Phantom PX Digital, Synce, Fohse, and other digital-protocol brands
- Zone Coverage
- 1 zone per module (one Digital lightLINK per zone)
- Dimensions
- 7.75″ × 7.75″ × 3.75″
- Multi-Brand Fixture Support
- Works with ThinkGrow, Dutch Lighting Innovations, Phantom PX Digital, Synce, Fohse, and more.
- Sunrise / Sunset Ramping
- Configurable ramp window at the start and end of each photoperiod smooths the plant's transition.
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기당신의 공간을 위한 더 많은 가능성
조명 액세서리
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
출처 참조KRW 399,481
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.