더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

Growlink Climalink

모델/SKU: GL-LINK-CLIMATECO2

Growlink ClimaLINK climate sensor for aspirated canopy monitoring

Dimensions
9.25" × 4.375" × 3.75"
Temperature Range
-40 to 257°F (-40 to 125°C)
Temperature Accuracy
±0.18°F (±0.1°C)
Humidity Range
0–100% RH
출처 참조 가격KRW 666,692

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

Growlink ClimaLINK climate sensor for aspirated canopy monitoring

Product details

  • The ClimaLINK reads canopy air at -40 to 257°F (-40 to 125°C) ±0.18°F and 0–100% RH ±1.0%, then derives VPD on board so the values that drive transpiration arrive already calculated at the Growlink hub.
  • Passive sensors stall in dense canopies.
  • The aspirated head pulls a steady stream of air across the probes, which matters when leaf-height microclimates form around the housing and a static sensor ends up reading the dead spot instead of the actual canopy.
  • Two configurations for any grow room climate sensor build
  • GL-LINK-CLIMATE covers temp, humidity, light, and VPD; GL-LINK_CLIMATECO2 adds an NDIR 0–5000 ppm CO₂ sensor at ±3% accuracy for rooms actively dosing CO₂.
  • Both share the same 9.25" × 4.375" × 3.75" housing with sealed filters over the intakes, which matters less in a clean propagation room than in a flowering room where overspray and root-zone dust eventually creep into exposed probes.
  • Hang it at leaf height, run the included 5m M8 cable to the hub, and the readings feed the same Growlink OS pipeline that handles irrigation, substrate VWC, and climate setpoints.
  • Aspirated Sensor Head: Active airflow across the probes keeps readings honest in dense canopies where passive sensors stall on stale air pockets.
  • Built-in VPD Calculation: Vapor pressure deficit arrives pre-computed at the hub, so Growlink OS plots VPD without an extra calculation layer on the dashboard.
  • Optional NDIR CO₂ Module: The CLIMATECO2 SKU adds 0–5000 ppm sensing at ±3% accuracy, sized for rooms running active CO₂ enrichment up to typical flowering targets.
  • Wide Temperature Range: -40 to 257°F (-40 to 125°C) at ±0.18°F resolution covers propagation cold rooms through greenhouse summer peaks without switching probes.
  • Sealed Filter Construction: Filters over each intake keep media dust and irrigation overspray off the sensor element across a full flowering cycle.
  • 5m M8 Cable Included: Pre-terminated cable runs from the ClimaLINK to the Growlink hub without a custom harness or field-built connector.
  • Growlink OS Integration: Data drops into the same dashboard, logging, and automation rules as Growlink's irrigation and substrate sensors.
  • Technical Specifications

명세서

Temperature Range
-40 to 257°F (-40 to 125°C)
Temperature Accuracy
±0.18°F (±0.1°C)
Humidity Range
0–100% RH
Humidity Accuracy
±1.0%
Light Measurement
Included
Dimensions
9.25" × 4.375" × 3.75"
Compatible System
Growlink OS
Wide Temperature Range
-40 to 257°F (-40 to 125°C) at ±0.18°F resolution covers propagation cold rooms through greenhouse summer peaks without switching probes.
Sealed Filter Construction
Filters over each intake keep media dust and irrigation overspray off the sensor element across a full flowering cycle.
Growlink OS Integration
Data drops into the same dashboard, logging, and automation rules as Growlink's irrigation and substrate sensors.
Option
With Co2, No Co2

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.