자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
What the Growlink canopyLINK Consolidates in a Room
Product details
- Sensor sprawl is the quiet cost of instrumenting a grow.
- Every probe wants a channel and every channel wants a port.
- A controller runs out of inputs long before a room runs out of things worth measuring.
- This node answers that by taking eight sensors onto a single device.
- Each one lands on its own M8 port, and addressing happens automatically, so swapping or adding a probe never means configuring a channel by hand.
- Power is 24VDC at 5W from the included supply, which is a small enough load to run alongside everything else on a bench.
- Operating range covers 50 to 122 degrees Fahrenheit and up to 75 percent relative humidity, non-condensing.
- The housing is water resistant, which suits a greenhouse or an indoor room without adding a separate enclosure.
- Connection to a Growlink HUB runs over the supplied ten-foot RJ-45 cable, or the unit joins over Wi-Fi for a hub-free install.
- Mixing Probes on a Substrate Sensor Hub
- Sensor types mix freely across the eight ports.
- TerraLINK probes read root-zone water content, EC and temperature straight out of the slab or pot.
- ClimaLINK sensors cover air temperature, humidity and vapour pressure deficit.
- A PAR sensor on another port captures canopy light intensity for the same node.
- Third-party instruments speaking SDI-12 land on those same M8 ports, which keeps existing greenhouse hardware in service rather than forcing a wholesale swap.
- Mount the node close enough to the canopy that no cable ends up under tension.
- Because addressing is automatic, plug position does not matter and neither does the sequence of installation.
- Inside Growlink OS the whole assembly registers as one device, which frees regular HUB ports for actuators such as valveLINK and quadLINK.
- One limit is worth stating plainly.
- This node reads, it does not switch.
- Every output decision still runs through Growlink OS or Copilot rules on the wider platform.
- Eight Auto-Addressing M8 Ports: Substrate, climate and light sensors share any port, with channel assignment handled by the hub.
- Growlink and SDI-12 Compatible: TerraLINK and ClimaLINK run natively, and compatible third-party SDI-12 instruments work without firmware changes.
- Wi-Fi or Wired: Pair over Wi-Fi for a hub-free install, or plug into a Growlink HUB with the ten-foot RJ-45 cable.
- One Device in Growlink OS: The node registers once, which leaves regular HUB ports free for actuators like valveLINK and quadLINK.
- Water-Resistant Housing: Greenhouse and indoor cultivation conditions are handled without a separate protective enclosure.
- Low Power Draw: 24VDC at 5W from the included supply keeps the node undemanding on a crowded bench.
- Made in the USA: Domestic manufacture with a mounting kit and power supply included in the box.
명세서
- Input Power
- 24VDC, 5W
- Sensor Inputs
- 8x M8 ports with auto-addressing
- Sensor Compatibility
- Growlink TerraLINK / ClimaLINK plus SDI-12
- Connectivity
- Wi-Fi standalone or RJ-45 to a Growlink HUB
- Operating Temperature
- 50-122 F (10-50 C)
- Operating Humidity
- 0-75% RH, non-condensing
- Dimensions
- 7.75 x 7.75 x 3.75 in
- OS Footprint
- Registers as a single device in Growlink OS
- Low Power Draw
- 24VDC at 5W from the included supply keeps the node undemanding on a crowded bench.
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.