더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

Growlink Batch TankLINK Temperature Sensor

모델/SKU: GL-LINK-TEMPSENSOR

Real-Time Nutrient Reads with the Growlink Batch TankLINK Temperature Sensor

Power
24VDC via TankLINK controller
Connection
Screw terminal block (labeled on transmitter)
Compatible Controller
Growlink Batch TankLINK (pH, EC, Temp, Level inputs)
Calibration
LCD wizard, paired with pH & EC probes
출처 참조 가격KRW 60,109

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

Real-Time Nutrient Reads with the Growlink Batch TankLINK Temperature Sensor

Product details

  • The Growlink Batch TankLINK Temperature Sensor reads nutrient solution temperature directly inside a batch tank or reservoir.
  • The probe ties into the Batch TankLINK controller's screw terminal block.
  • It reports continuously at 0.02°F resolution with ±3.6°F (±2°C) accuracy.
  • The controller itself operates from 50 to 122°F.
  • That range covers the 68–72°F target band most hydroponic crops respond to inside the root zone.
  • Drop the probe into calibration solution alongside the pH and EC probes during the LCD wizard.
  • It locks in for the run.
  • Wiring the TankLINK Temperature Probe into a Live Recirculation Loop
  • The sensor handles the temperature input on a controller that already measures pH, EC, and tank level on the same board.
  • Pair it with a chiller or in-line heater triggered by the TankLINK.
  • The nutrient solution temperature probe data then holds tighter to setpoint through lights-on heat spikes.
  • On drain-to-waste schedules, the temperature read alongside EC tells you whether morning-shot solubility issues are temperature-driven.
  • That separates a chiller problem from a recipe problem before you adjust the feed.
  • Plug-and-play wiring keeps a single-probe swap during teardown to a few minutes.
  • No driver shuffling — just the batch tank temperature probe back into the terminal block and a quick recalibrate.
  • Most rooms keep one spare on hand for summer runs when reservoir temps climb hardest, particularly in greenhouses without dedicated cooling.
  • ±3.6°F (±2°C) Accuracy: Tight enough to confirm the nutrient line stays inside the 68–72°F sweet spot.
  • 0.02°F Resolution: Picks up small drifts during lights-on spikes before they widen into a real swing.
  • Direct TankLINK Integration: Wires straight into the Batch TankLINK controller's labeled screw terminal block.
  • Calibration Wizard Compatible: Drops into the LCD wizard alongside pH and EC for a single calibration pass.
  • Plug-and-Play Replacement: Probe swap during teardown takes minutes — terminal block in, recalibrate, run.
  • Technical Specifications

명세서

Connection
Screw terminal block (labeled on transmitter)
Compatible Controller
Growlink Batch TankLINK (pH, EC, Temp, Level inputs)
Calibration
LCD wizard, paired with pH & EC probes
Power
24VDC via TankLINK controller
Direct TankLINK Integration
Wires straight into the Batch TankLINK controller's labeled screw terminal block.
Calibration Wizard Compatible
Drops into the LCD wizard alongside pH and EC for a single calibration pass.

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.