이 콘텐츠는 현재 원어로 제공됩니다.
컨트롤러 및 계량기도매 문의
Growlink Batch TankLINK EC Sensor
모델/SKU: GL-LINK-ECSENSOR
Reading Conductivity with the Growlink Batch TankLINK EC Sensor
- EC Range
- 0–7,000 µS
- Temperature Compensation
- Built-in PT1000 element in cable
- Cable Length
- 10 ft (3 m); 30 ft available separately
- Calibration
- Single-point @ 1413 µS via LCD wizard
출처 참조 가격KRW 180,354
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
Reading Conductivity with the Growlink Batch TankLINK EC Sensor
Product details
- The Growlink Batch TankLINK EC Sensor measures nutrient solution conductivity inside a batch tank in real time.
- The probe reads across a 0–7,000 µS range.
- Accuracy is ±20 µS below 2,000 µS and ±50 µS above that.
- Resolution is 2 µS — roughly 0.02 mS/cm in PPM-meter terms.
- A 10-foot cable runs from the probe to the Batch TankLINK controller's labeled screw terminal block.
- The cable also carries a PT1000 element that gives the controller automatic temperature compensation on every reading.
- Calibration is a single-point process at 1413 µS.
- Drop the probe into calibration solution alongside the temperature probe to lock in the cal pass.
- Wiring the TankLINK EC Probe into a Recirculation Loop
- Most batch-tank installs run a separate probe per recirculation loop.
- The 10-foot cable covers tanks within reach of the controller.
- The 30-foot option (available separately) handles longer runs where the controller mounts wall-side and the tank sits across the room.
- Pair the data with the TankLINK's automated dosing and refill triggers and the nutrient solution EC sensor holds the line to setpoint between batches.
- PT1000-compensated readings also mean morning EC checks match afternoon checks even when the room runs 8°F warmer under lights.
- Plug-and-play wiring keeps a single-probe swap during teardown to a few minutes.
- No driver shuffling — just the batch tank conductivity probe back into the terminal block and a fresh 1413 µS recalibrate.
- Most rooms swap the probe at the start of each season or when calibration drift crosses ±50 µS at the cal point.
- 0–7,000 µS Range: Covers the full PPM band growers feed across veg, transition, and bloom in one probe.
- Tiered Accuracy: ±20 µS below 2,000 µS and ±50 µS above — tight enough to catch real EC drift between feeds.
- Built-In PT1000 Compensation: The cable carries a temperature element so readings stay honest across an 8°F lights-on swing.
- 10 ft Cable Standard: Reaches most controller-to-tank layouts; a 30 ft version is available separately for longer runs.
- Single-Point Calibration: One 1413 µS solution and the LCD wizard handle the full cal — no two-point dance required.
- Technical Specifications
명세서
- EC Range
- 0–7,000 µS
- Temperature Compensation
- Built-in PT1000 element in cable
- Cable Length
- 10 ft (3 m); 30 ft available separately
- Calibration
- Single-point @ 1413 µS via LCD wizard
- Connection
- Screw terminal block on Batch TankLINK transmitter
- Compatible Controller
- Growlink Batch TankLINK
- Single-Point Calibration
- One 1413 µS solution and the LCD wizard handle the full cal — no two-point dance required.
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.