이 콘텐츠는 현재 원어로 제공됩니다.
영양분 및 배양토도매 문의
Dosatron DOSAKLEAN CLEANSER
모델/SKU: CLEANSER-ALL-25
DosaKlean Cleanser Soak for Dosatron Injector Maintenance
- SIZE
- box of 25 packets, pail of 100 packets
- Packet Net Weight
- .187 lb
- Compatible Materials
- Plastic and stainless steel injectors
- Pack Options
- Box of 25 packets; pail of 100 packets
출처 참조 가격KRW 306,104
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
DosaKlean Cleanser Soak for Dosatron Injector Maintenance
Product details
- Scale builds inside a proportional injector long before the dose drifts far enough to notice.
- DosaKlean is the answer to that: a water-soluble concentrate sold in .187 lb packets, made to dissolve rust, calcification and mineral deposits from injector parts.
- The blend combines descaling compounds, surfactants, and natural and artificial ingredients.
- The soak itself takes very little effort.
- Take the injector apart and rinse every part in clean water to clear any chemical residue.
- Dissolve one packet in 1 gallon of water, one packet per injector, and soak the parts for 24 to 48 hours.
- Larger injectors take two packets in 2 gallons.
- Pull the parts, rinse them thoroughly with clean water, and reassemble.
- There is no scrubbing step.
- While it cleans, the solution also lubricates the internal seals and moving components, so the piston and motor go back together moving freely.
- A Fertilizer Injector Cleaner That Belongs in the Service Routine
- Most growers pair the soak with the seal change, since the injector is already in pieces on the bench.
- That turns a scale problem into a routine job instead of a dead motor halfway through a feed cycle.
- Calcium nitrate, hard well water and acid injection all leave deposits, so stations running those tend to need it more often.
- The formula is safe on both plastic and stainless steel injectors.
- Use it on its own and do not mix it with other products.
- Store unopened packets in a cool, dry place between service days.
- The real trade-off is downtime.
- A full soak takes the injector out of service for a day or two.
- A spare unit or a planned plain-water day keeps crops on schedule.
- Rinse thoroughly before reassembly, since residue left on the parts ends up in the first tank of feed.
- As a fertilizer injector cleaner it is maintenance, not a repair: worn seals still need replacing.
- Water-soluble concentrate: Dissolves in plain water, so there is nothing to measure beyond one packet per gallon.
- Removes rust and scale: Lifts rust, calcification and mineral deposits from injector parts without scrubbing.
- Lubricates as it cleans: Treats interior seals and moving components during the same soak, so parts reassemble smoothly.
- Safe on injector materials: Cleans plastic and stainless steel injector parts without harming either.
- Pre-measured packets: Each .187 lb packet treats one injector, and larger units take two packets in two gallons.
- Technical Specifications
명세서
- Packet Net Weight
- .187 lb
- Compatible Materials
- Plastic and stainless steel injectors
- Pack Options
- Box of 25 packets; pail of 100 packets
- Safe on injector materials
- Cleans plastic and stainless steel injector parts without harming either.
- SIZE
- box of 25 packets, pail of 100 packets
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.