더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

조명 액세서리도매 문의

DAB E.SYWALL Mount Bracket · Wall Kit for E.SYBOX & E.SYBOX Mini 3

모델/SKU: 727952

DAB E.SYWALL Mount Bracket for E.SYBOX and E.SYBOX Mini 3

Package dimensions
14 x 10 x 2 in
Compatible pumps
E.SYBOX, E.SYBOX Mini 3
Kit contents
Brackets, screws, wall dowels, 2 shock-absorbing spacers
Package weight
2.2 lb
출처 참조 가격KRW 235,146

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

DAB E.SYWALL Mount Bracket for E.SYBOX and E.SYBOX Mini 3

Product details

  • The E.SYWALL is the bracket set DAB makes for hanging an E.SYBOX or E.SYBOX Mini 3 on a wall, off the floor.
  • The kit carries part number 60161442 and ships with brackets, screws, wall dowels and two shock-absorbing spacers.
  • Packed, the whole set measures about 14 x 10 x 2 in and weighs roughly 2.2 lb.
  • The brackets fasten to the pump body and to the wall, so the unit hangs as one tidy block.
  • Those spacers sit between the pump and the mounting surface.
  • They soak up motor vibration before it reaches masonry or a stud wall.
  • That matters most when the pump shares a wall with an office, a dry room or a neighbor.
  • Lifting the unit off the floor also keeps it clear of standing water when a reservoir overflows or a fitting lets go.
  • In a fertigation room, floor space usually belongs to tanks, mixing carts and injectors.
  • Hanging the booster frees that area and shortens the run to an overhead manifold.
  • Plan the drill pattern before mounting, since a full pump is a heavy, awkward lift.
  • Fitting the Wall Mounting Kit in a Grow or Utility Room
  • Most installs put the booster at about shoulder height beside the reservoir it draws from.
  • That makes the display easy to read and the filling plug easy to reach when priming.
  • Use flexible connectors or braided hose between the pump and hard pipe, so the brackets are not carrying plumbing strain.
  • Solid masonry takes the supplied dowels well.
  • On drywall, find a stud or back the bracket with a plywood panel first.
  • Keep the suction line short and free of high points, so air does not collect on its way to the pump.
  • Tighten the wall screws before hanging the pump, then check them again after the first week of cycling.
  • This kit fits only the E.SYBOX and the E.SYBOX Mini 3.
  • Twin-pump layouts use the E.SYTWIN station instead, so confirm which unit you run before fitting it.
  • Once mounted, the pump runs, primes and services exactly as it would on the floor.
  • Complete kit: Brackets, screws, wall dowels and spacers arrive together, so the install needs no separate hardware run.
  • Shock-absorbing spacers: Two spacers isolate motor vibration from the wall, which keeps a booster quiet in rooms people work in.
  • Matched fit: Made for the E.SYBOX and E.SYBOX Mini 3 housings, so the pump sits square and level on the wall.
  • Off-floor placement: Raising the pump frees floor space for tanks and keeps it out of standing water after a spill.
  • Unchanged service access: Display, filling plug and service bay stay reachable, so priming and checks work as they do on the floor.
  • Technical Specifications

명세서

Compatible pumps
E.SYBOX, E.SYBOX Mini 3
Kit contents
Brackets, screws, wall dowels, 2 shock-absorbing spacers
Package dimensions
14 x 10 x 2 in
Package weight
2.2 lb

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.