이 콘텐츠는 현재 원어로 제공됩니다.
컨트롤러 및 계량기도매 문의
Bluelab Pro Controller Wi-Fi
모델/SKU: 716489
What the Bluelab Pro Controller Wi-Fi Holds to Setpoint
- Power Supply
- 100-240 VAC, 50/60 Hz, output 5 VDC 1.5 A
- pH Range / Accuracy
- 0.0 - 14.0 / ±0.1 @ 25°C
- Temperature Range
- 0-50°C / 32-122°F
- Probe Cable Length
- 2 m (6 ft)
출처 참조 가격KRW 2,002,748
비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.
결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.
공장 직송 지원15년 이상의 경력
자세히 살펴보기
이 제품에 대해 좀 더 자세히 알아보겠습니다.
What the Bluelab Pro Controller Wi-Fi Holds to Setpoint
Product details
- Three parameters, and you can run one, two or all three.
- It reads pH across 0.0-14.0 at ±0.1 and conductivity from 0 to 5.0 EC at ±0.1.
- Temperature covers 0-50°C / 32-122°F.
- It then doses to bring each parameter back to the value you programmed.
- Dosing intervals are yours to tune against pump size, tank volume and stock dilution, which keeps a small tank from overshooting.
- It runs on a 100-240 VAC supply, so it is not fussy about the panel it lands next to.
- Every probe is removable and replaceable, on 2 m cables.
- Running an Automatic pH and EC Controller Without Getting Burned
- The safety logic is the part worth paying for.
- High and low alarms sit on each parameter.
- Internal lockouts stop nutrient dosing when a temperature alarm fires.
- An external terminal lets a flow switch kill all dosing when the pump is idle.
- Automatic lockouts also stop dosing outright if the unit detects a fault.
- Set your lockouts before your setpoints.
- The pH probe carries a calibration quality indicator, so you know when it is drifting rather than finding out through a crop.
- Two things to budget for.
- The controller does not include the dosing pumps, so a Peridoser or Solenoid is a separate line item.
- A Bluelab Connect Stick is included.
- Controls pH, conductivity and temperature: Run one parameter or all three, each with its own high and low alarm and its own setpoint.
- Tunable dosing intervals: Match dose length to pump size, tank volume and stock dilution so a small reservoir does not overshoot.
- Layered safety lockouts: Internal, external and automatic fault lockouts stop dosing before a stuck pump becomes a dead crop.
- Replaceable probes on 2 m cables: pH connects by BNC, and every probe comes off individually rather than forcing a whole-unit swap.
- Bluelab Connect Stick included: Data logs and remote monitoring through Bluelab Connect without a separate stick.
- Technical Specifications
명세서
- pH Range / Accuracy
- 0.0 - 14.0 / ±0.1 @ 25°C
- Temperature Range
- 0-50°C / 32-122°F
- Power Supply
- 100-240 VAC, 50/60 Hz, output 5 VDC 1.5 A
- Probe Cable Length
- 2 m (6 ft)
- Connectivity
- Wi-Fi, Bluelab Connect (stick included)
- Dosing Compatibility
- Bluelab Peridoser and Solenoid dosing systems
- Bluelab Connect Stick included
- Data logs and remote monitoring through Bluelab Connect without a separate stick.
프로젝트에 도움이 되도록 만들어 봅시다.
문의 시 수량, 배송지, 재배 지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.
저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.
계속 탐험하세요
모든 제품 보기
질문 및 토론
궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.