더 밝은 성장 방식. 공장 직송 도매. 15년 이상 축적된 전문성

이 콘텐츠는 현재 원어로 제공됩니다.

12 inch Backdraft Damper

모델/SKU: VTBDD12

Sizing a 12 inch Backdraft Damper Into a Big Run

Duct diameter
12 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
출처 참조 가격KRW 69,047

비교 목적으로만 사용하십시오. 현재 도매 가격, 재고 여부 및 배송 조건을 문의하십시오.

결제는 필요하지 않습니다. 필요한 사항에 대해 이야기 나눠보세요.

공장 직송 지원15년 이상의 경력
자세히 살펴보기

이 제품에 대해 좀 더 자세히 알아보겠습니다.

Sizing a 12 inch Backdraft Damper Into a Big Run

Product details

  • At twelve inches everything about a damper is bigger, including the consequences of getting it wrong.
  • An open duct this size is a substantial hole in a building.
  • With the fan off it moves cold air, odour and dust in the wrong direction continuously.
  • On a room built around a pressure relationship, that undoes the whole design.
  • The two blades here are correspondingly large plates, which is why the hinge arrangement matters.
  • Each blade has its own hinge, so a blade that catches on debris does not hold its partner open with it.
  • Galvanized steel keeps plates this size rigid enough to seat properly for years in a humid duct.
  • A neoprene perimeter gasket takes the closure.
  • On a plate this size that is the difference between a soft thud and a bang carrying through a building.
  • Installing a Duct Insert of This Diameter
  • The assembly pushes into the duct rather than mounting on a flange, which at this diameter saves genuine work.
  • There is no transition piece to fabricate and nothing to line up beyond the duct itself.
  • It installs in any orientation.
  • Two things deserve attention at this size.
  • Support the duct on both sides of the damper properly.
  • A twelve inch run carries real weight, and a sagging duct distorts the housing until the blades no longer seat.
  • The second is access to it afterwards.
  • A damper buried in a ceiling void where nobody can reach it will eventually stop sealing and nobody will know.
  • Atmosphere quote an opening requirement of four to eight hundredths of an inch of static pressure.
  • A correctly specified twelve inch fan clears that easily at speed.
  • Confirm it at low speed too.
  • Check the swing and wipe the sealing face at every filter service.
  • Why it matters: An open duct this size is a substantial hole in a building
  • Blades: Two large plates, each on its own independent hinge
  • Hinge design: A blade that catches cannot hold its partner open
  • Body: Galvanized steel, stiff enough to keep large plates seating
  • Seal: Neoprene perimeter gasket, which softens the closure
  • Mounting: Inserts into the duct, with no transition piece to fabricate

명세서

Duct diameter
12 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Support
Hold the duct both sides so the housing cannot distort

프로젝트에 도움이 되도록 만들어 봅시다.

문의 시 수량, 배송지, 재배 ​​지역, 전압 또는 플러그 요구 사항을 포함해 주십시오. 사양, 재고 여부, 배송 및 보증 조건은 서면 견적서에서 확인하실 수 있습니다.

저장된 환율을 사용한 참조 변환 (날짜 기준) 2026. 11. 15.. 환산된 금액은 견적이 아닙니다.

함께 성장해요

질문 및 토론

0

궁금한 점이 있거나 유용한 정보를 공유하고 싶으신가요? 대화를 시작해 보세요.

계속 탐험하세요

당신의 공간을 위한 더 많은 가능성

모든 제품 보기
좋은 일의 시작

당신의 프로젝트를 세상에 선보여 봅시다.

필요한 사항에 대해 간략하게 알려주세요. 고객님의 정보를 바탕으로 적절한 도매 견적을 준비해 드리겠습니다.

제품 목록

비용 부담이나 의무는 없습니다. 유익한 대화만 나누겠습니다.