このコンテンツは現在、元の言語で提供されています。
コントローラーとメーター卸売に関するお問い合わせ
Water Content Sensor 3 with splitter cable set
モデル/SKU: WCS-3
This probe reports the moisture in a grow medium as volumetric water content, shown as a percentage.
- Power
- 12 V DC, 100 to 200 mA
- Package size
- 170 x 90 x 54 mm
- Model
- WCS-3
- Connection
- M12, daisy-chain
出典参考価格JPY 18,966
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
This probe reports the moisture in a grow medium as volumetric water content, shown as a percentage.
Product details
- What the TrolMaster WCS-3 Measures
- Three slim prongs slide into coco coir, rock wool or soil with little displacement, even in small cubes.
- A built-in LCD wakes when the sensor is tapped or moved and shows the live VWC reading.
- Data also flows to the controller, which can raise alarms and send mobile alerts when moisture passes a setpoint.
- Sensors connect over M12 cable and daisy-chain with the included T-splitter.
- Aqua-X Pro and Hydro-X Pro accept up to 50 sensors, Aqua-X Plus up to 20, Aqua-X up to 8 and Tent-X one.
- The probe runs on 12 V supplied by the system and draws 100 to 200 mA.
- It is rated for 32 to 122 °F and below 90% humidity, and carries CE, FCC and ETL marks.
- The set includes the sensor, an M12 T-splitter and a 4 ft M12 cable.
- Using a Water Content Sensor to Steer Irrigation
- A water content sensor turns irrigation timing from guesswork into a number the whole team can read.
- Insert the prongs fully into the substrate, keeping them away from the pot wall and the drip emitter.
- Place sensors in blocks or pots that represent the room, not the wettest or driest corner.
- Watch the overnight dryback, the drop in VWC between the last and first irrigation.
- A larger dryback pushes plants toward generative growth, while a smaller one keeps them vegetative.
- Set high and low alarms so the controller flags a stuck valve or a failed pump quickly.
- Link the readings to Aqua-X so pump events can start or stop on moisture rather than the clock alone.
- Add sensors across zones as the room grows, chaining them with M12 splitters.
- Keep the probe clean and reseat it after each media change so readings stay comparable.
- Log the data across a crop to fine-tune the next run.
- With steady readings, irrigation decisions become repeatable from one harvest to the next.
- VWC readings: Moisture shown as a percentage of the medium.
- Slim three-prong probe: Fits small rock wool cubes and coco pots.
- Tap-to-wake LCD: Live reading at the plant without opening the app.
- M12 daisy-chain: Up to 50 sensors on Aqua-X Pro or Hydro-X Pro.
- Alerts and crop steering: Setpoint alarms and mobile notifications.
- Technical Specifications
仕様
- Model
- WCS-3
- Connection
- M12, daisy-chain
- Power
- 12 V DC, 100 to 200 mA
- Certifications
- CE, FCC, ETL
- Package size
- 170 x 90 x 54 mm
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。