このコンテンツは現在、元の言語で提供されています。
コントローラーとメーター卸売に関するお問い合わせ
TrolMaster Sensor Bracket (2-pack)
モデル/SKU: TSB-1
How the TrolMaster TSB-1 Holds a Sensor
- Package size
- 85 x 68 x 67 mm
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
出典参考価格JPY 2,550
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
How the TrolMaster TSB-1 Holds a Sensor
Product details
- This set contains two holders that work together to mount one sensor.
- TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
- Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
- Each holder fixes flat to a wall or post.
- Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
- The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
- That matters because a swinging sensor reads the air in a different spot from one minute to the next.
- The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
- The pack ships in a box about 85 x 68 x 67 mm.
- Placing a Sensor Mounting Bracket for Accurate Readings
- A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
- TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
- The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
- Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
- Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
- Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
- Seat the sensor and route its cable along the wall so it does not pull on the housing.
- Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
- In larger rooms, a set for each sensor keeps every reading consistent.
- Wipe dust off the sensor during routine cleaning.
- Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
- Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
- Two holders per pack: Together they mount one sensor.
- Curved locking edges: Hold the sensor firmly in place.
- Joinable design: Holders link with a mortise-and-tenon joint.
- Technical Specifications
仕様
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
- Mounting
- Wall mount, joinable holders
- Package size
- 85 x 68 x 67 mm
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。