より明るい成長の道。工場直送卸売。 15年以上にわたる専門知識の蓄積

このコンテンツは現在、元の言語で提供されています。

コントローラーとメーター卸売に関するお問い合わせ

Sensorex TDS Sensor

モデル/SKU: CS150TC-K-1.0-P1K-10-BNC-TL

Reading EC with the Growlink Sensorex CS150 TDS Sensor

SIZE
10' Cable, 30' Cable
Sensor Type
Contacting conductivity / TDS, graphite electrodes
Probe Diameter
12 mm
Temperature Element
PT1000 (Automatic Temperature Compensation)
出典参考価格JPY 31,796

参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。

料金は一切不要です。お客様のニーズについてお話ししましょう。

工場直送サポート15年以上の経験
さらに詳しく見てみよう

この製品についてもう少し詳しく

Reading EC with the Growlink Sensorex CS150 TDS Sensor

Product details

  • The Growlink Sensorex CS150 TDS Sensor reads conductivity and total dissolved solids on a 12 mm graphite contacting probe rated for lab and light-industrial use.
  • The cell constant is K=1.0, which covers the standard hydroponic feed range.
  • A built-in PT1000 temperature element feeds Automatic Temperature Compensation back through the same cable.
  • EC reads stay honest across reservoir temperature swings.
  • Terminations include a BNC connector for instrumentation and tinned leads for transmitter wiring.
  • The body is plastic with graphite measuring surfaces.
  • Operating range is 0–70°C / 32–158°F.
  • Tank or In-Line Mounting and Sensorex CX-Series Wiring
  • The probe handles two install paths.
  • Drop it into a tank for submerged reads.
  • The in-line option uses an FC50P or FC75P gland and nut fitting through a tee, sized for ½″ and ¾″ NPT pipes.
  • The lab cable variant talks to the Sensorex CM1000 meter.
  • The 10ft and 30ft process cables wire into Sensorex CX-series transmitters such as the CX105, CX2000, CX2000RS, and CX3100.
  • Pick the cable length that matches the run from probe to transmitter.
  • Clean the graphite surface with gentle detergent or 5% HCl in a small cup between batches.
  • The Sensorex CS150 conductivity sensor holds calibration through the cleaning cycle.
  • Most rooms work through two probes a season once a graphite element has logged enough hours in high-EC drainback.
  • Pair this graphite EC/TDS sensor with a Sensorex transmitter for continuous logging through the run.
  • Keep a spare on the shelf for swap-day during summer drainback peaks.
  • A spare cuts downtime when a probe needs cleaning mid-bloom.
  • 12 mm Graphite Contacting Probe: Cost-effective EC/TDS read for lab and light-industrial reservoir or in-line use.
  • K=1.0 Cell Constant: Sized for the standard hydroponic feed range — good resolution from veg through bloom EC values.
  • PT1000 Temperature Element: Automatic Temperature Compensation built into the cable keeps EC readings honest across tank temp swings.
  • BNC + Tinned Lead Terminations: BNC plugs into instrumentation; tinned leads land on Sensorex CX-series transmitter terminals.
  • Tank or In-Line Mounting: Submerge in the reservoir or install in a tee with FC50P (½″ NPT) or FC75P (¾″ NPT) gland fittings.
  • Technical Specifications

仕様

Sensor Type
Contacting conductivity / TDS, graphite electrodes
Probe Diameter
12 mm
Temperature Element
PT1000 (Automatic Temperature Compensation)
Connector / Termination
BNC + tinned leads (TL)
Cable Length Options
10 ft (3 m) or 30 ft (9 m)
Body Material
Plastic body, graphite measuring surfaces
Mounting
Submersible in tank, or in-line via FC50P (½″ NPT) / FC75P (¾″ NPT)
Compatible Transmitters
Sensorex CX105, CX2000, CX2000RS, CX3100 (process cable); CM1000 (lab cable)
Tank or In-Line Mounting
Submerge in the reservoir or install in a tee with FC50P (½″ NPT) or FC75P (¾″ NPT) gland fittings.
SIZE
10' Cable, 30' Cable

あなたのプロジェクトに役立てましょう

お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。

保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。

一緒に成長しよう

質問とディスカッション

0

質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。

探検を続けよう

空間の可能性がさらに広がります

すべての商品を見る
良いことの始まり

あなたのプロジェクトを世に知らしめましょう。

お客様のご要望について少しお聞かせください。いただいた情報をもとに、適切な卸売りのご提案をさせていただきます。

商品リスト

料金は一切かかりません。義務も一切ありません。ただ、有益な会話を楽しみたいだけです。