このコンテンツは現在、元の言語で提供されています。
換気と気候卸売に関するお問い合わせ
Ruck 8 Back Draught Dampner
モデル/SKU: 149394
How the 8 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
出典参考価格JPY 3,675
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
How the 8 Inch Back Draught Damper Seals an Idle Duct
Product details
- Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
- The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
- On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
- Mounting a Backdraft Shutter in the Right Place
- Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
- Put it downstream of the fan with the flaps opening the way the air goes.
- The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
- Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
- If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
- Nudge the speed up a step.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
仕様
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。