このコンテンツは現在、元の言語で提供されています。
換気と気候卸売に関するお問い合わせ
Ruck 4 Back Draught Dampner
モデル/SKU: 148389
How the 4 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
出典参考価格JPY 2,876
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
How the 4 Inch Back Draught Damper Seals an Idle Duct
Product details
- This is a one-way gate in the duct.
- Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
- The housing is galvanized sheet steel.
- On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
- Mounting a Backdraft Shutter in the Right Place
- It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
- Fit it downstream of the fan with the flaps opening in the direction of flow.
- Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
- Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
- On a small run the flaps are light enough to open at low fan speed without stalling.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
仕様
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。