このコンテンツは現在、元の言語で提供されています。
換気と気候卸売に関するお問い合わせ
Ruck 12 Back Draught Dampner
モデル/SKU: 149477
How the 12 Inch Back Draught Damper Seals an Idle Duct
- Nothing about it is powered
- airflow alone opens it and spring pressure alone closes it.
- Duct Size
- 12 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
出典参考価格JPY 6,231
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
How the 12 Inch Back Draught Damper Seals an Idle Duct
Product details
- At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
- The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
- Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
- Mounting a Backdraft Shutter in the Right Place
- Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
- Install it after the fan, flaps opening downstream.
- There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
- Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
- A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
仕様
- Duct Size
- 12 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Nothing about it is powered
- airflow alone opens it and spring pressure alone closes it.
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。