このコンテンツは現在、元の言語で提供されています。
繁殖と植物の手入れ卸売に関するお問い合わせ
Quest Muffler Kit (Hi-E 195)
モデル/SKU: 4039075
What the Quest Hi-E Dry 195 Muffler Kit Does
- Type
- Muffler kit, noise reduction panels
- Contents
- Two formed metal panels with mounting holes
- Effect on capacity
- None
- Quieter operation
- Reduced noise without compromising performance.
出典参考価格JPY 15,179
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
What the Quest Hi-E Dry 195 Muffler Kit Does
Product details
- The kit is a pair of white formed metal panels, angled and octagonal in outline, drilled for mounting on the Hi-E Dry 195 cabinet.
- It is Quest part 4039075, an accessory for the 195 alongside the duct collar kit and the replacement filter.
- The 195 is the big floor unit of the Hi-E Dry line, PN 4036710, rated at 195 pints a day at 80 °F and 60 percent humidity.
- It moves 610 CFM through a 2 in MERV 11 filter, and it draws 1,385 W on a dedicated 20 A circuit.
- Most of what a grower hears from it is that blower.
- The muffler panels sit on the air path to take the edge off it.
- It cuts noise from the Hi-E Dry 195 without taking anything away from performance.
- Air enters the 195 at the top and leaves at the side, and it needs a foot of clearance from walls at both openings.
- The panels mount to the cabinet, so that clearance is still what it was once the kit is on.
- The kit is a retrofit for a 195 installed near people who have to work beside it all day.
- A dry room next to a trim bench, a basement grow under a bedroom, a greenhouse head house with a desk in it.
- The 195 weighs 130 lb and stands 42 in tall, and nobody moves one to get away from the sound.
- The kit is the lighter answer.
- It ships at about 4 lb.
- Dehumidifier Noise Reduction in a Grow Room, Beyond the Muffler
- Dehumidifier noise reduction starts with the blower and ends with the floor, and the muffler panels only cover the first part.
- Vibration isolation under the 195 keeps operational vibration and noise down.
- A rubber pad or a set of isolation feet under the cabinet stops the hum from travelling through a slab into the next room.
- Keep the top inlet and the side outlet a foot clear of walls, since air whistling past an obstruction is a noise of its own.
- A ducted 195 is quieter in the room it serves because the machine sits elsewhere.
- The duct collar kit is the way to do that, and the runs should stay short.
- Duct up to 25 ft total wants a 12 in intake.
- Change the pleated filter on schedule.
- A loaded filter makes the fan pull against resistance, and a fan under strain is both louder and less efficient.
- Set the humidistat so the unit cycles on a sensible band rather than hunting.
- A compressor that starts every few minutes is heard every few minutes.
- Fit the muffler panels with the unit powered down and the filter out.
- Run the machine for a minute afterwards and listen for a panel that buzzes.
- A buzz means a loose fastener, not a bad kit.
仕様
- Type
- Muffler kit, noise reduction panels
- Contents
- Two formed metal panels with mounting holes
- Effect on capacity
- None
- Quieter operation
- Reduced noise without compromising performance.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。