このコンテンツは現在、元の言語で提供されています。
換気と気候卸売に関するお問い合わせ
Quest Duct Kit (Hi-E 195)
モデル/SKU: 4039132
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
出典参考価格JPY 29,559
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
Product details
- This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
- A duct cover plate blocks off the opening the ducted setup no longer uses.
- Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
- Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
- The installation sheet for the kit is TS-1059, written for the Hi-E series.
- The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
- Nothing else is needed from the dehumidifier side.
- Flex or rigid duct in matching sizes completes the run.
- Why Growers Fit a Dehumidifier Duct Kit
- A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
- That keeps its heat and noise out of the room and frees floor space for plants.
- Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
- Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
- Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
- Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
- Plan the drain line at the same time, since a remote unit still needs a path for condensate.
- The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
- 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
- Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
- Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
- Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
- Technical Specifications
仕様
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。