このコンテンツは現在、元の言語で提供されています。
照明アクセサリー卸売に関するお問い合わせ
Quest 70 Pint - Hanging Bracket Kit
モデル/SKU: 4036695
Everything in the Quest 70 Hanging Kit, Item by Item
- Bracket dimensions
- 16.50 x 2.19 x 1.00 in
- Bracket shape
- L-shaped, cut to hug the unit
- Mounting
- Eyebolts into structure, not drywall or a suspended grid
- Two L-shaped brackets
- 16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
出典参考価格JPY 21,251
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Everything in the Quest 70 Hanging Kit, Item by Item
Product details
- The Quest 70 hanging kit carries five distinct parts.
- Two brackets, four eyebolts, four cables with carabiners, and a quarter inch clip on 8 ft of nylon rope.
- That rope and clip are the two pieces most often left off a parts list.
- They are what the kit uses for the drain line rather than for the unit itself.
- The brackets are the part worth understanding.
- They are L-shaped and measure 16.50 by 2.19 by 1.00 in, and they are cut to hug the body of the machine rather than to bolt through it.
- Two of them take the load and the four cables carry it up to the eyebolts.
- That is a four point suspension, which is what keeps a dehumidifier level when it is running.
- Level matters more on a dehumidifier than on a fan.
- The condensate has to reach the drain.
- A unit hanging a few degrees out holds water in the pan and eventually pushes it somewhere else.
- Set the four cables to equal length before the machine goes up, not after.
- What to Check Before Fitting a Dehumidifier Ceiling Mount
- Fitment first, because this kit is model specific in a way the part name does not say.
- It fits the Quest 70, part 4033750, and the Quest 70 50-Hz build, part 4033810, and nothing else.
- The larger Quest units take a different overhead bracket under its own part number.
- Second, the structure above the machine.
- The ceiling has to be verified against the operating weight of the machine.
- Eyebolts go into structure, never into drywall or a suspended grid, so find the joists first.
- Third on the list comes the drain.
- A hanging unit has to gravity-feed its condensate somewhere, and that line needs a continuous fall from the machine to wherever it goes.
- Work that path out before the eyebolts go in, because moving a drain afterwards means moving the machine.
- Part 4036695: The part number for this kit specifically.
- Two L-shaped brackets: 16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
- Four cables with carabiners: A four point suspension, which is what holds the unit level.
- Four eyebolts: Into structure rather than drywall or a suspended ceiling grid.
- Clip and 8 ft of nylon rope: Included in the kit, and the piece most often overlooked.
- Quest 70 only: Parts 4033750 and 4033810; larger units take a different bracket.
仕様
- Bracket shape
- L-shaped, cut to hug the unit
- Bracket dimensions
- 16.50 x 2.19 x 1.00 in
- Mounting
- Eyebolts into structure, not drywall or a suspended grid
- Two L-shaped brackets
- 16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る空間の可能性がさらに広がります
照明アクセサリー
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
出典元JPY 47,774
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。