より明るい成長の道。工場直送卸売。 15年以上にわたる専門知識の蓄積

このコンテンツは現在、元の言語で提供されています。

水耕栽培と灌漑卸売に関するお問い合わせ

Netafim Pulse Reed Switch

モデル/SKU: 70220-005300

What a Pulse Reed Switch Adds to a Water Meter

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.
出典参考価格JPY 11,308

参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。

料金は一切不要です。お客様のニーズについてお話ししましょう。

工場直送サポート15年以上の経験
さらに詳しく見てみよう

この製品についてもう少し詳しく

What a Pulse Reed Switch Adds to a Water Meter

Product details

  • A mechanical meter counts perfectly well and tells nobody.
  • This register sits on the meter and adds an electrical output.
  • No power is needed on the meter side, because the switch is passive.
  • Reading the Water Meter Pulse Output at the Controller
  • Any controller, datalogger or PLC with a digital input can take it, which is what makes a water meter pulse output so portable across equipment.
  • The controller does the arithmetic: count the pulses, multiply by the volume each pulse represents, and you have consumption.
  • That multiplier is set by the meter rather than by the switch, and Netafim meters are supplied in different pulse values.
  • Check the register on the meter you are fitting, because getting that number wrong scales every reading you log.
  • Two practical notes.
  • Reed contacts are mechanical and they do eventually wear, which is the usual reason one gets replaced rather than a fault in the meter itself.
  • And run the signal pair away from pump and light wiring, since a long unshielded run beside a contactor can pick up false counts.
  • Passive, no power needed: The switch takes nothing on the meter side.
  • The controller supplies the sensing circuit.
  • Volume per pulse is set by the meter: Netafim meters ship in different pulse values, so check the register before you scale readings.
  • A common replacement part: Reed contacts are mechanical and wear, which is usually why one is swapped.
  • Keep the run clean: Route the signal pair away from pump and lighting wiring to avoid false counts.
  • Technical Specifications

仕様

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.

あなたのプロジェクトに役立てましょう

お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。

保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。

一緒に成長しよう

質問とディスカッション

0

質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。

探検を続けよう

空間の可能性がさらに広がります

すべての商品を見る
良いことの始まり

あなたのプロジェクトを世に知らしめましょう。

お客様のご要望について少しお聞かせください。いただいた情報をもとに、適切な卸売りのご提案をさせていただきます。

商品リスト

料金は一切かかりません。義務も一切ありません。ただ、有益な会話を楽しみたいだけです。