このコンテンツは現在、元の言語で提供されています。
水耕栽培と灌漑卸売に関するお問い合わせ
Netafim 16mm Insert Barb Tee - 100 Pack
モデル/SKU: 32500-011330
Laying out drip on a bench or a row bed means splitting lines, and the tee is the fitting that does it.
- Size
- 16 mm
- Fitting Type
- Barb tee, barb x barb x barb
- Dripline Inside Diameter
- 14.2 mm
- Dripline Wall Thickness
- 0.9 to 1.2 mm
出典参考価格JPY 11,897
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Laying out drip on a bench or a row bed means splitting lines, and the tee is the fitting that does it.
Product details
- Netafim 16mm Insert Barb Tee
- This one has three barbed ports in a T shape, all sized for 16 mm dripline.
- Water coming in one side carries straight through and also turns out the branch.
- That lets one feed line serve two beds, or a lateral start partway along a header.
- Netafim lists this tee for 16 mm dripline with an inside diameter of 14.2 mm.
- Its catalog fits it to heavy wall tubing with walls from 0.9 to 1.2 mm.
- Each barb grips the inside of the tube, so no clamps or glue are needed.
- The body is a UV and chemical resistant polymer that holds up to sun and fertilizer in the water.
- It is a single molded piece, so there are no joints inside the fitting to leak.
- Netafim's catalog number for this 100 bag is 32500-011330.
- One bag covers a large layout with tees to spare.
- Keeping spares on hand also makes it simple to add a bed later.
- Branching 16mm Dripline Without Leaks
- Plan the layout first so each tee lands where a branch is needed.
- Turn the water off and cut the run line square at the tee position.
- Push the two cut ends onto the straight-through ports of the tee.
- Then push the branch line onto the side port.
- Seat each tube fully over its barb so the joint does not pull off under pressure.
- A slight twist while pushing helps stiff tubing slide on.
- Warm cold tubing in the sun for a few minutes to soften it.
- Add up the emitter flow on both sides of the tee to check the feed line can carry it.
- Very long branches lose pressure toward the end, so keep runs within the dripline maker's length tables.
- Turn the zone on and check every port for drips at full pressure.
- Flush both legs with their ends open before closing them off.
- Mark tee positions on the layout plan so they are easy to find for future repairs.
- Three Barbed Ports: Splits one 16 mm line into two runs.
- Push-On Fit: No clamps, glue or tools.
- Heavy Wall Fit: For 14.2 mm ID dripline, 0.9 to 1.2 mm wall.
仕様
- Fitting Type
- Barb tee, barb x barb x barb
- Size
- 16 mm
- Dripline Inside Diameter
- 14.2 mm
- Dripline Wall Thickness
- 0.9 to 1.2 mm
- Material
- UV and chemical resistant polymer
- Pack Quantity
- 100
- Three Barbed Ports
- Splits one 16 mm line into two runs.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。