このコンテンツは現在、元の言語で提供されています。
水耕栽培と灌漑卸売に関するお問い合わせ
Growlink Valve LINK
モデル/SKU: GL-LINK-VALVE
Growlink valveLINK Irrigation Controller for Precision Crop Steering
- Input Power
- 24VDC, max 2.7A combined
- Dimensions
- 7.75" × 7.75" × 3.75"
- Outputs
- 8× Sourcing FETs (24VDC valve control)
- Valve Compatibility
- 24VDC solenoids (not 24VAC)
出典参考価格JPY 47,774
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Growlink valveLINK Irrigation Controller for Precision Crop Steering
Product details
- The Growlink valveLINK Irrigation Controller drives up to eight independent solenoids or DC valves.
- Each channel runs through 24VDC sourcing FETs rated 1A per output and 2.7A combined.
- Each output ties directly into Growlink OS, where Copilot can build crop-steering programs that adjust shot count, duration, and timing per zone.
- The unit pairs over WiFi for standalone use or connects to a Growlink HUB via the included 10-foot RJ-45 cable for wired installs.
- Operating range covers 50–122°F (10–50°C) and 0–75% RH non-condensing, suitable for greenhouse and indoor cultivation.
- Eight-Zone Drip Schedules from a Precision Irrigation Controller
- Map each channel to one irrigation zone — bench, table, or plant block.
- The precision irrigation controller fires the matching valve when the Copilot program calls a shot.
- Place the controller centrally enough that valve runs stay under the FET's 1A current limit per channel.
- 24V latching solenoids draw more on the pull pulse, so size cable gauge and split high-draw valves across channels.
- For larger facilities, scale by adding additional valveLINK units to the same Growlink OS account.
- Channels stay logically grouped under zone names rather than module IDs.
- Sensor-based mode pairs well with substrate moisture probes.
- The controller delays the next shot until water content drops past the dryback target, which is core to crop steering.
- Note 24VAC solenoids aren't compatible — these outputs are DC sourcing FETs, so verify the valve coil type before wiring.
- 8 Independent Channels (1A Each, 2.7A Combined): Drive up to eight 24VDC irrigation valves on dedicated sourcing FETs sized for typical solenoid duty.
- Growlink Copilot Crop Steering: Build dryback-aware shot programs that adapt by zone, substrate sensor input, or feeding stage.
- WiFi Standalone or HUB Wired Mode: Pair to Growlink OS over WiFi for solo setups or plug into a Growlink HUB via the included RJ-45 cable.
- Flexible Control Modes: Run manual, schedule-based, or sensor-triggered irrigation across all eight channels.
- Made in the USA: Built for demanding greenhouse and indoor agricultural environments with serviceable construction.
- Technical Specifications
仕様
- Input Power
- 24VDC, max 2.7A combined
- Outputs
- 8× Sourcing FETs (24VDC valve control)
- Valve Compatibility
- 24VDC solenoids (not 24VAC)
- Connectivity
- WiFi (standalone) or RJ-45 to Growlink HUB
- Operating Temperature
- 50–122°F (10–50°C)
- Operating Humidity
- 0–75% RH (non-condensing)
- Dimensions
- 7.75" × 7.75" × 3.75"
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。