このコンテンツは現在、元の言語で提供されています。
繁殖と植物の手入れ卸売に関するお問い合わせ
Growlink SI Pulse Module
モデル/SKU: BMT-F-SI4 BACnet MS/TP
4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters
- Inputs
- 4 × S0 pulse, DIN EN 62053-31 Class A
- Supply voltage
- 24 V AC/DC
- Mounting
- TH35 DIN rail (IEC 60715)
- Configuration
- 2 front rotary switches (address + bit rate)
出典参考価格JPY 39,146
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters
Product details
- The BMT-F-SI4 carries four S0 inputs that meet DIN EN 62053-31 Class A.
- BACnet MS/TP reports the rolling count back to the Growlink controller.
- The software converts pulses to gallons per minute, then trims pump runtime to land the exact injection volume each dose calls for.
- BACnet MS/TP S0 Input with Retentive Counters and 500 Hz Capture
- Pulse capture runs at 50 Hz through the Accumulator object and 500 Hz through the PulseConverter object.
- A high-pulse flow meter on a fast-cycling pump stays accurate.
- Retentive memory holds the last counter reading through a power blip.
- That matters when a recipe spans a UPS swap or breaker trip.
- Address and bit rate set with two rotary switches on the front.
- A new module drops onto an existing trunk without bringing the BACnet line up on a laptop.
- 4 × S0 pulse inputs (DIN EN 62053-31 Class A): Plug any S0-output flow or energy meter into the module.
- BACnet MS/TP over a single trunk: Reports counter values back to the Growlink controller and any other BACnet client without protocol gateways.
- 50 Hz Accumulator / 500 Hz PulseConverter: Two BACnet objects cover slow utility meters and fast injection-pump feedback on the same module.
- Retentive counter memory: Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.
- 2 front-panel rotary switches: Set BACnet address and bit rate without a laptop or DIP-switch acrobatics.
- 24 V AC/DC supply with spring-clamp terminals: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
- TH35 DIN rail mount: IEC 60715 rail snap-in keeps panels tidy alongside BMT-F-TO4, BMT-F-AOP4, or BMT-F-RTR.
- Technical Specifications
仕様
- Inputs
- 4 × S0 pulse, DIN EN 62053-31 Class A
- Supply voltage
- 24 V AC/DC
- Mounting
- TH35 DIN rail (IEC 60715)
- Configuration
- 2 front rotary switches (address + bit rate)
- Retentive counter memory
- Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。