このコンテンツは現在、元の言語で提供されています。
コントローラーとメーター卸売に関するお問い合わせ
Growlink Level Sensor (for Batch TankLINK)
モデル/SKU: GL-LINK-LEVEL
Reading Tank Level with the Growlink Batch TankLINK Level Sensor
- Sensor Type
- Float / serpentine pontoon
- Output Signal
- 4–20mA analog
- Connector
- Molex (1× 4–20mA input on controller)
- Compatible Controller
- Growlink Batch TankLINK (alongside pH, EC, Temp inputs)
出典参考価格JPY 15,818
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Reading Tank Level with the Growlink Batch TankLINK Level Sensor
Product details
- The Growlink Batch TankLINK Level Sensor floats a serpentine pontoon directly in the nutrient tank.
- The pontoon's shape lets the assembly drop through narrow tank openings without disassembly.
- The transducer translates that movement into a 4–20mA signal.
- A Molex connector carries the signal to the controller's level input.
- That feed drives the TankLINK's refill logic and overfill alarms.
- The controller can call a fill pump on or trip an alert before the tank crosses either threshold.
- Wiring the TankLINK Level Sensor into the Same Tank as pH, EC, and Temp
- Most growers position this TankLINK level sensor in the same tank that already holds the pH, EC, and temperature probes.
- A single Batch TankLINK runs all four inputs from one board.
- The 4–20mA output is the standard analog type the controller's level input expects.
- The nutrient tank level sensor wires in with no protocol conversion.
- Plug-and-play installation keeps a sensor swap to a few minutes during tank teardown.
- Lift the pontoon, unplug the Molex, drop in the new unit, and the controller picks the reading back up at the next sample cycle.
- Tank cleaning between runs is the most common time to inspect the pontoon for scale buildup.
- A wipe with a soft cloth keeps the batch tank level sensor reading honest across the next harvest cycle.
- The continuous 4–20mA reading also pairs with the controller's logged history for season-over-season fill-rate analysis.
- That helps spot a slow leak or a clogged refill solenoid before the next crop suffers a dry-tank hour.
- 4–20mA Analog Output: Standard signal type wired straight into the Batch TankLINK controller's level input.
- Molex Connector Wiring: Plug-and-play swap during teardown — unplug, lift, replace, plug back in.
- Automated Refill + Overfill Logic: Feeds the controller's level thresholds for pump triggers and alert calls before the tank crosses either.
- Continuous Level Tracking: Real-time reading across the full tank stroke, not just point-level high/low switches.
- Technical Specifications
仕様
- Sensor Type
- Float / serpentine pontoon
- Output Signal
- 4–20mA analog
- Connector
- Molex (1× 4–20mA input on controller)
- Compatible Controller
- Growlink Batch TankLINK (alongside pH, EC, Temp inputs)
- Molex Connector Wiring
- Plug-and-play swap during teardown — unplug, lift, replace, plug back in.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。