より明るい成長の道。工場直送卸売。 15年以上にわたる専門知識の蓄積

このコンテンツは現在、元の言語で提供されています。

照明アクセサリー卸売に関するお問い合わせ

Growlink HUB Connection Cable (3M)

モデル/SKU: HUB-CON-3M

Wiring the Growlink HUB Connection Cable into Your LINKS System

HUB Power Budget
Within 1A shared across 8 ports
Length
3 m (9 ft 10 in)
Connector
RJ-45 (8P8C)
Compatible Devices
canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
出典参考価格JPY 1,596

参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。

料金は一切不要です。お客様のニーズについてお話ししましょう。

工場直送サポート15年以上の経験
さらに詳しく見てみよう

この製品についてもう少し詳しく

Wiring the Growlink HUB Connection Cable into Your LINKS System

Product details

  • The Growlink HUB Connection Cable runs a 3-meter (9 ft 10 in) line between any compatible LINKS device and the LINKS 8-Port Device HUB.
  • It uses 8-conductor RJ-45 straight-through wiring terminated on standard RJ-45 jacks at both ends.
  • The single cable carries 24VDC power and Modbus data together.
  • That keeps each device on one port instead of pulling power and signal on separate runs.
  • The wiring matches what the HUB documentation calls out for every port, so any 8-conductor RJ-45 cable to that spec drops in.
  • Planning Runs with a 3m LINKS Device RJ-45 Cable
  • At 3 meters, the run covers most layouts where the HUB sits just outside a flower room.
  • The device end can land on a canopy frame, controller wall, or substrate tray inside the space.
  • Growers running the 8-Port Device HUB usually allocate one cable per LINK device port.
  • The canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, and Batch TankLINK family all use this same connector.
  • Each draws within the HUB's 1A power budget.
  • If a sensor lands farther out, this Growlink HUB accessory pairs with another drop to bridge the gap.
  • A single LINKS automation cable rarely reaches a far-corner device on its own in larger rooms.
  • 3-Meter Length: Spans 9 ft 10 in from HUB port to device — long enough for most room-to-canopy runs.
  • RJ-45 Straight-Through Wiring: Eight-conductor pinout matches every Growlink LINK device port and the HUB's documented spec.
  • Power + Data on One Line: Delivers 24VDC and Modbus signal so each LINK draws everything from a single port.
  • HUB-Native Connector: Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.
  • Cultivation-Environment Build: Jacketing holds up to the temperature swings and humidity typical inside flower and veg rooms.
  • Technical Specifications

仕様

Length
3 m (9 ft 10 in)
Connector
RJ-45 (8P8C)
HUB Power Budget
Within 1A shared across 8 ports
Compatible Devices
canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
HUB-Native Connector
Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.

あなたのプロジェクトに役立てましょう

お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。

保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。

一緒に成長しよう

質問とディスカッション

0

質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。

探検を続けよう

空間の可能性がさらに広がります

すべての商品を見る
良いことの始まり

あなたのプロジェクトを世に知らしめましょう。

お客様のご要望について少しお聞かせください。いただいた情報をもとに、適切な卸売りのご提案をさせていただきます。

商品リスト

料金は一切かかりません。義務も一切ありません。ただ、有益な会話を楽しみたいだけです。