このコンテンツは現在、元の言語で提供されています。
照明アクセサリー卸売に関するお問い合わせ
Growlink Digital Light LINK
モデル/SKU: GL-LINK-LIGHTD
Spectrum, Intensity, and Timing on the Growlink Digital lightLINK
- Input Power
- 24VDC via Growlink HUB (RJ-45)
- Zone Coverage
- 1 zone per module (one Digital lightLINK per zone)
- Dimensions
- 7.75″ × 7.75″ × 3.75″
- Current / Consumption
- 1A, 3W typical
出典参考価格JPY 23,807
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Spectrum, Intensity, and Timing on the Growlink Digital lightLINK
Product details
- The Growlink Digital lightLINK runs spectrum, intensity, and timing for any lighting zone wired to the Growlink HUB.
- The controller talks to compatible fixtures over an RJ-12 data port or a terminal block, depending on the brand.
- That covers ThinkGrow, Dutch Lighting Innovations, Phantom PX Digital, Synce, Fohse, and other digital-protocol fixtures.
- Power comes from the HUB over the RJ-45 connection at 24VDC, 1A, 3W typical.
- One module covers one lighting zone.
- Larger rooms run one digital lighting controller per zone so each zone holds its own schedule and ramp.
- Wiring the LINKS Lighting Controller for Sunrise, Sunset, and Safety
- The controller relies on a canopyLINK and ClimaLINK sensor connected to the HUB for High Heat Shutdown.
- That's the safety logic that drops the zone if temperature climbs out of range.
- Sunrise and sunset transitions ramp the lights in over a configurable window at the start and end of each photoperiod.
- That smooths the stress hit plants take during a hard on/off cycle.
- Spectrum control adjusts the channel mix on multi-band LEDs through the same digital line.
- Operating range is 50–122°F and 0–75% RH non-condensing — fits inside any standard control enclosure.
- The box itself runs 7.75″ × 7.75″ × 3.75″ and ships with a mounting kit, a 10 ft RJ-45 cable, and a screwdriver for the terminal-block wiring.
- RJ-12 + Terminal Block Outputs: Talks to compatible fixtures over the digital port their brand uses — no protocol converters needed.
- Multi-Brand Fixture Support: Works with ThinkGrow, Dutch Lighting Innovations, Phantom PX Digital, Synce, Fohse, and more.
- Sunrise / Sunset Ramping: Configurable ramp window at the start and end of each photoperiod smooths the plant's transition.
- Full Spectrum + Intensity Control: Adjusts channel mix on multi-band LEDs and overall intensity from veg through bloom.
- 24VDC Power via HUB: Pulls 1A, 3W typical over the RJ-45 link — no separate brick at the controller end.
- High Heat Shutdown Safety: Cuts the zone when canopyLINK or ClimaLINK reports out-of-range temps to the HUB.
- Mounting Kit + 10 ft RJ-45 Included: Ships ready to install — screwdriver, mounting hardware, and the HUB-to-controller cable in-box.
- Technical Specifications
仕様
- Input Power
- 24VDC via Growlink HUB (RJ-45)
- Current / Consumption
- 1A, 3W typical
- Fixture Outputs
- RJ-12 data port + terminal block
- Compatible Fixtures
- ThinkGrow, Dutch Lighting Innovations, Phantom PX Digital, Synce, Fohse, and other digital-protocol brands
- Zone Coverage
- 1 zone per module (one Digital lightLINK per zone)
- Dimensions
- 7.75″ × 7.75″ × 3.75″
- Multi-Brand Fixture Support
- Works with ThinkGrow, Dutch Lighting Innovations, Phantom PX Digital, Synce, Fohse, and more.
- Sunrise / Sunset Ramping
- Configurable ramp window at the start and end of each photoperiod smooths the plant's transition.
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る空間の可能性がさらに広がります
照明アクセサリー
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
出典元JPY 47,774
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。