このコンテンツは現在、元の言語で提供されています。
繁殖と植物の手入れ卸売に関するお問い合わせ
Growlink Climalink
モデル/SKU: GL-LINK-CLIMATECO2
Growlink ClimaLINK climate sensor for aspirated canopy monitoring
- Dimensions
- 9.25" × 4.375" × 3.75"
- Temperature Range
- -40 to 257°F (-40 to 125°C)
- Temperature Accuracy
- ±0.18°F (±0.1°C)
- Humidity Range
- 0–100% RH
出典参考価格JPY 79,730
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Growlink ClimaLINK climate sensor for aspirated canopy monitoring
Product details
- The ClimaLINK reads canopy air at -40 to 257°F (-40 to 125°C) ±0.18°F and 0–100% RH ±1.0%, then derives VPD on board so the values that drive transpiration arrive already calculated at the Growlink hub.
- Passive sensors stall in dense canopies.
- The aspirated head pulls a steady stream of air across the probes, which matters when leaf-height microclimates form around the housing and a static sensor ends up reading the dead spot instead of the actual canopy.
- Two configurations for any grow room climate sensor build
- GL-LINK-CLIMATE covers temp, humidity, light, and VPD; GL-LINK_CLIMATECO2 adds an NDIR 0–5000 ppm CO₂ sensor at ±3% accuracy for rooms actively dosing CO₂.
- Both share the same 9.25" × 4.375" × 3.75" housing with sealed filters over the intakes, which matters less in a clean propagation room than in a flowering room where overspray and root-zone dust eventually creep into exposed probes.
- Hang it at leaf height, run the included 5m M8 cable to the hub, and the readings feed the same Growlink OS pipeline that handles irrigation, substrate VWC, and climate setpoints.
- Aspirated Sensor Head: Active airflow across the probes keeps readings honest in dense canopies where passive sensors stall on stale air pockets.
- Built-in VPD Calculation: Vapor pressure deficit arrives pre-computed at the hub, so Growlink OS plots VPD without an extra calculation layer on the dashboard.
- Optional NDIR CO₂ Module: The CLIMATECO2 SKU adds 0–5000 ppm sensing at ±3% accuracy, sized for rooms running active CO₂ enrichment up to typical flowering targets.
- Wide Temperature Range: -40 to 257°F (-40 to 125°C) at ±0.18°F resolution covers propagation cold rooms through greenhouse summer peaks without switching probes.
- Sealed Filter Construction: Filters over each intake keep media dust and irrigation overspray off the sensor element across a full flowering cycle.
- 5m M8 Cable Included: Pre-terminated cable runs from the ClimaLINK to the Growlink hub without a custom harness or field-built connector.
- Growlink OS Integration: Data drops into the same dashboard, logging, and automation rules as Growlink's irrigation and substrate sensors.
- Technical Specifications
仕様
- Temperature Range
- -40 to 257°F (-40 to 125°C)
- Temperature Accuracy
- ±0.18°F (±0.1°C)
- Humidity Range
- 0–100% RH
- Humidity Accuracy
- ±1.0%
- Light Measurement
- Included
- Dimensions
- 9.25" × 4.375" × 3.75"
- Compatible System
- Growlink OS
- Wide Temperature Range
- -40 to 257°F (-40 to 125°C) at ±0.18°F resolution covers propagation cold rooms through greenhouse summer peaks without switching probes.
- Sealed Filter Construction
- Filters over each intake keep media dust and irrigation overspray off the sensor element across a full flowering cycle.
- Growlink OS Integration
- Data drops into the same dashboard, logging, and automation rules as Growlink's irrigation and substrate sensors.
- Option
- With Co2, No Co2
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。