より明るい成長の道。工場直送卸売。 15年以上にわたる専門知識の蓄積

このコンテンツは現在、元の言語で提供されています。

コントローラーとメーター卸売に関するお問い合わせ

Growlink Batch TankLINK EC Sensor

モデル/SKU: GL-LINK-ECSENSOR

Reading Conductivity with the Growlink Batch TankLINK EC Sensor

EC Range
0–7,000 µS
Temperature Compensation
Built-in PT1000 element in cable
Cable Length
10 ft (3 m); 30 ft available separately
Calibration
Single-point @ 1413 µS via LCD wizard
出典参考価格JPY 21,569

参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。

料金は一切不要です。お客様のニーズについてお話ししましょう。

工場直送サポート15年以上の経験
さらに詳しく見てみよう

この製品についてもう少し詳しく

Reading Conductivity with the Growlink Batch TankLINK EC Sensor

Product details

  • The Growlink Batch TankLINK EC Sensor measures nutrient solution conductivity inside a batch tank in real time.
  • The probe reads across a 0–7,000 µS range.
  • Accuracy is ±20 µS below 2,000 µS and ±50 µS above that.
  • Resolution is 2 µS — roughly 0.02 mS/cm in PPM-meter terms.
  • A 10-foot cable runs from the probe to the Batch TankLINK controller's labeled screw terminal block.
  • The cable also carries a PT1000 element that gives the controller automatic temperature compensation on every reading.
  • Calibration is a single-point process at 1413 µS.
  • Drop the probe into calibration solution alongside the temperature probe to lock in the cal pass.
  • Wiring the TankLINK EC Probe into a Recirculation Loop
  • Most batch-tank installs run a separate probe per recirculation loop.
  • The 10-foot cable covers tanks within reach of the controller.
  • The 30-foot option (available separately) handles longer runs where the controller mounts wall-side and the tank sits across the room.
  • Pair the data with the TankLINK's automated dosing and refill triggers and the nutrient solution EC sensor holds the line to setpoint between batches.
  • PT1000-compensated readings also mean morning EC checks match afternoon checks even when the room runs 8°F warmer under lights.
  • Plug-and-play wiring keeps a single-probe swap during teardown to a few minutes.
  • No driver shuffling — just the batch tank conductivity probe back into the terminal block and a fresh 1413 µS recalibrate.
  • Most rooms swap the probe at the start of each season or when calibration drift crosses ±50 µS at the cal point.
  • 0–7,000 µS Range: Covers the full PPM band growers feed across veg, transition, and bloom in one probe.
  • Tiered Accuracy: ±20 µS below 2,000 µS and ±50 µS above — tight enough to catch real EC drift between feeds.
  • Built-In PT1000 Compensation: The cable carries a temperature element so readings stay honest across an 8°F lights-on swing.
  • 10 ft Cable Standard: Reaches most controller-to-tank layouts; a 30 ft version is available separately for longer runs.
  • Single-Point Calibration: One 1413 µS solution and the LCD wizard handle the full cal — no two-point dance required.
  • Technical Specifications

仕様

EC Range
0–7,000 µS
Temperature Compensation
Built-in PT1000 element in cable
Cable Length
10 ft (3 m); 30 ft available separately
Calibration
Single-point @ 1413 µS via LCD wizard
Connection
Screw terminal block on Batch TankLINK transmitter
Compatible Controller
Growlink Batch TankLINK
Single-Point Calibration
One 1413 µS solution and the LCD wizard handle the full cal — no two-point dance required.

あなたのプロジェクトに役立てましょう

お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。

保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。

一緒に成長しよう

質問とディスカッション

0

質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。

探検を続けよう

空間の可能性がさらに広がります

すべての商品を見る
良いことの始まり

あなたのプロジェクトを世に知らしめましょう。

お客様のご要望について少しお聞かせください。いただいた情報をもとに、適切な卸売りのご提案をさせていただきます。

商品リスト

料金は一切かかりません。義務も一切ありません。ただ、有益な会話を楽しみたいだけです。