このコンテンツは現在、元の言語で提供されています。
繁殖と植物の手入れ卸売に関するお問い合わせ
Growlink Batch TankLINK
モデル/SKU: GL-LINK-BATCH
Growlink batch tankLINK Controller for Real-Time Tank and Nutrient Management
- Input Power
- 24VDC (via Growlink HUB or compatible PSU)
- Power Consumption
- 5W
- Sensor Inputs
- pH, EC, Temperature, Tank Level
- Dimensions
- 7.75" × 7.75" × 3.75" (197 × 197 × 96 mm)
出典参考価格JPY 127,663
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Growlink batch tankLINK Controller for Real-Time Tank and Nutrient Management
Product details
- The Growlink batch tankLINK Controller handles pH, EC, temperature, and tank-level monitoring through a single 24VDC unit pulling roughly 5W at full duty.
- High-accuracy probes feed live readings back to Growlink OS, where recipes drive automated fill cycles and trigger deviation alerts before a batch drifts off-target.
- Operating range covers 50–122°F (10–50°C) and 0–75% RH non-condensing, which keeps it stable in greenhouse ranges and indoor flower rooms alike.
- Recirculating and Batch-Fill Workflows in an Automated Nutrient Dosing System
- Two cable lengths cover most fertigation layouts.
- The 10-foot kit (GL-LINK-BATCH) suits compact mixing stations sitting beside the rack, while the 30-foot kit (GL-LINK-BATCH30) handles centralized rooms feeding multiple zones.
- Both kits ship the same probe set; only the sensor cable run differs.
- Place the unit close to the reservoir so the sensor cables drop into the active flow path.
- Probes pinned to a dead corner lag the real batch reading by several minutes, which matters during auto-correction.
- Standalone WiFi mode covers single-tank operations.
- Pairing with the Growlink HUB rolls the device into a wider automated nutrient dosing system.
- Shared logging, alerts, and recipe libraries cover every fertigation tank in the operation.
- Automated Fill Control: Triggers refill cycles when the level sensor drops below threshold, so a recirculating tank doesn't run dry mid-irrigation.
- Real-Time pH, EC, and Temperature Probes: High-accuracy sensors stream live data so the controller corrects nutrient drift before it shows up at the canopy.
- Growlink OS Recipe Automation: Set targets per crop stage and let the system mix, dose, and log every fill cycle without manual intervention.
- Standalone or HUB-Connected Operation: Run as a self-contained WiFi nutrient tank monitor or as a node inside a multi-tank Growlink HUB deployment.
- Technical Specifications
仕様
- Input Power
- 24VDC (via Growlink HUB or compatible PSU)
- Power Consumption
- 5W
- Operating Temperature
- 50–122°F (10–50°C)
- Operating Humidity
- 0–75% RH (non-condensing)
- Dimensions
- 7.75" × 7.75" × 3.75" (197 × 197 × 96 mm)
- Sensor Inputs
- pH, EC, Temperature, Tank Level
- Sensor Cable Lengths
- 10 ft (GL-LINK-BATCH) or 30 ft (GL-LINK-BATCH30)
- Standalone or HUB-Connected Operation
- Run as a self-contained WiFi nutrient tank monitor or as a node inside a multi-tank Growlink HUB deployment.
- SIZE
- 10' Sensor Cables, 30' Sensor Cables
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。