このコンテンツは現在、元の言語で提供されています。
繁殖と植物の手入れ卸売に関するお問い合わせ
Growlink 4 Triac Out Module
モデル/SKU: BMT-F-TO4 BACnet MS/TP
4-Channel Triac Output Module for Fast-Cycling Dosing Loads
- Supply voltage
- 24 V AC/DC
- Outputs
- 4 × solid-state triac
- Mounting
- TH35 DIN rail (IEC 60715)
出典参考価格JPY 39,146
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
4-Channel Triac Output Module for Fast-Cycling Dosing Loads
Product details
- The BMT-F-TO4 carries four solid-state triac outputs rated 0.8 A each at 24 V AC/DC.
- Where a DO-4 relay would burn out chasing the rapid pulses an HE Anderson injection pump asks for, the triac switches stay clean.
- The pump fires rhythmically at the injection rate the dosing recipe calls for, and BACnet MS/TP carries the setpoints from the Growlink controller.
- BACnet MS/TP Triac Module with Manual Override on Every Channel
- Each output gets a three-position black toggle.
- Setting A lets Growlink software command the channel.
- Setting 1 forces the triac on.
- Setting 0 locks it off.
- The module clips to a TH35 DIN rail and lands the BACnet line on spring-clamp terminals, so commissioning takes minutes per panel.
- Wire it next to a BMT-F-DI4 or BMT-F-AOP4 for a full BACnet I/O stack on the same trunk.
- 4 triac outputs at 0.8 A: Solid-state switching for fast-cycling AC loads like HE Anderson dosing pumps and small solenoid valves.
- BACnet MS/TP communication: Plugs into the Growlink controller and any other BACnet trunk without protocol gateways.
- Manual A/1/0 toggle per channel: Switch from software control to forced on or forced off without rewiring the panel.
- 24 V AC/DC supply: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
- TH35 DIN rail mount: Spring-clamp terminals snap into IEC 60715 rail for clean panel build-outs.
- No mechanical relays to wear out: Triac switching handles the rapid pulse trains a relay would burn out on inside a season.
- Stackable with BMT-F-DI4 / BMT-F-AOP4 / BMT-F-RTR: Build a full BACnet MS/TP I/O bank on one trunk with the Metz Connect family.
- Technical Specifications
仕様
- Outputs
- 4 × solid-state triac
- Supply voltage
- 24 V AC/DC
- Mounting
- TH35 DIN rail (IEC 60715)
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。